Bonne oven model BCS6SE2

I have two thoughts, both guesswork based on knowledge gained by researching answers here on Fixya.

If you removed the door completely, the safety microswitches need re-adjusting. The door and hinges usually has three or sometimes 4 to make it impossible to use the oven with the door open.

Or, modern ovens have a safety catch under the glass edges that won't allow the oven to work if there is NO glass on the inside, or no glass on the outside. In other words, there must be 2 (or 3) panes of glass to stop children, old folks and pets getting burned by door glass that is the same temperature as a oven.

The final possibility is that the microwave failing is coincidental and not related to the door glass being replaced!

Hi Mike - I am happy to assist you. First, according to my research, the model number that you have provided me is appearing invalid according to the Electrolux database within the US. Are you located outside of the US? Generally speaking, for some units the complete door set would need to be replaced. However, may I please have the correct model number, to better address the issue at hand? Typically the serial tag is located in the storage drawer on the right side. Thank you and I look forward to your response.

Hi,

No!!!
Here is a tip that I wrote about the oven door glass replacement...

It is not that hard...

Range/Stove/ Oven Door Glass Replacement

heatman101

replace the glass as it needs it to vent door properly . without the glass door area will run to hot .. ..

There's a safty switch which prevents the unit from operating if the door isn't fully closed. When the glass shattered a small piece may have blocked the switch from operating properly. Check around the door seals for any irregularities.

Very rare, in 35 years I replace maybe 2 to 5 a year out of 1500 to 2000 repairs a year on all major appliances. Make sure you replace it with the exact glass from the manufacturer, usuing your model number. Do not replace with glass from a glass shop.

We must have a model number to answer your question.

You just need the glass, get part number from Bosch website (UK) and source locally.

To fit just dismantle the door.

pull out the bottom drawer you will find a plate on the left side pillar of the drawer opening the model # and, serial # is there this is all that is needed to order a new door glass

will need a model number to tell you the correct price ... most will have to replace the door... you can also give sears a call .. if you gripe loud ... they may replace it for you...