Reset of time and date of yokatta dx-6 - Epson PhotoPC 750Z Digital Camera

Not much info about it.
look at
YOKATTA DX 6 BUNDY CLOCK MANUAL

how do I reset the GT on my Royal 210dx cash register?

how to adjust dx-6 bundy clock?

To set the time and date (must be done in this order) 1. Press MODE 3 times, then press START to change the seconds. 2. Press RESET to change the minutes, then press START until you get to the right minute. 3. Press RESET to change the hour, then press START until you get to the right hour. Note: If it says "H" on the right circle, it should read 24HOURS, otherwise it should read "A" for AM and "P" for PM. 4. Press RESET to set the date, then press START until you get to the right date 5. Press RESET to set the month, then press START until you get to the right number. 6. Press RESET to change the day of the week, then press START untilyou get to the right day. 6. Press MODE when done. Hope this helps

North American Release Date was 27 September 27, 2011. European release date was September 29-30, 2011.

Minimum Requirements
Celeron E1200 Dual-Core 1.6GHz
Athlon 64 X2 Dual Core 3600+

GeForce 6600
Radeon HD 2400 Pro

1 GB RAM

Win Xp 32
DX 9
6 GB


Recommended Requirements
Core 2 Duo E6600 2.4GHz
Athlon 64 X2 Dual Core 5600+

GeForce 8800 GS
Radeon HD 2900 XT 512MB

2 GB

Win Xp 32
DX 9
6 GB

1. Begin on the main sales screen
2. Press the purple MORE key twice
3. Choose OTHER SET UP from the display screen
4. Type in your password if applicable
5. Press the purple MORE key until the display reads SET DATE/TIME
6. Choose SET DATE/TIME from the display screen
7. Type in the date mm/dd/yyyy
8. Type in the time HH:MM:SS in Military Time
9. Press ENTER
10. Press the red CANCEL key

1. Press MENU to enter SET UP menu.
2. Press right or left arrow to reach the settings.
3. Then go on to view the menu
4. Find Reset Camera Settings.
5. Reset your camera.
6. Turn on the camera
7. Date/Time settings will appear.
8. Set your date/time.

Press

Function
71
set
key in date and military time
set
stop

get it to the local customer care
or there might be a problem with the signal reception
ask the service providers