Iphone 5 mic not working

Is this the Notes app that came with the phone, or one you installed?

Didn't seen iPhone 5 inside, however in my 3gs, which I changed screen 8 times it happened often that ear dynamic didn't worked, because of not very good spare screen, I always used my original ear dynamic, which I had to detach every time from the broken screen assembly and reattach to the new screen. Else - you should recheck if every cable was firmly reconnected back after repair procedure.

This is because the mic is located on the left side (phone facing toward you) as you switch hands the mic is moved further from your mouth.

Hello

1 .You need to confirm if its the volume or the mic of your phone that has the problem.

2 .If its the mic,your callers would not hear you but you would be able to hear them.

3. You can Adjust the volume of your iPhone by depressing the volume button on the left edge of the phone, close to the top. This will cause a volume indicator to appear, superimposed over the other icons on your screen. This will increase the volume of your ringer. If you wish to adjust the volume of the phone speaker, use this button during a live phone call. You can also control the volume of your speaker when you are using your iPhone as a music player in the same manner.

4. If its the mic,remove the iPhone from the case, as your case may be blocking the device's microphone.

5. Plug the iPhone device cable into the iPhone and into the computer's USB port.

6.Launch iTunes. Click "iPhone" or the device's name in the sidebar in iTunes and click "Summary then Click "Check for Update" and "Download and Install" to update your iPhone's OS.

7. Remove the device cable after the update finishes and insert your headphone jack into the iPhone's headphones port,tap "Phone" on the home screen, tap "Contacts" and tap a contact to place a call.

8. Press the "+" button on the microphone to increase your microphone's volume.

9. If the problem persists take your iPhone to your local Apple Store for professional service.
BEST OF LUCK

I may be wrong, but there is only one speaker on the iPhone. the bottom left is a speaker, the right is a mic.

check if any flex strip are hanging loose. and push them in their respective slots.

Unfortunately, solution is NOT free. Until Apple decides to take good look into this issue, you are left to buying another BT headset model.

I got lucky first time around, bought new Plantronics (not Playtronics...) Voyager 520 (I do love Plantronics 3xx design, this is the next best thing). It did cost almost twice as much as my previous headsets (about 45 EUR), but it's still on the cheap "side" and (to my experience) also the best value.
Hope new headset also lasts almost whole week before needing recharge, like my "old ones". :)

hardware seems broken. If it was a software problem, then the bluetooth would not have worked as well

ok attila, your problem is your mic,, here's what they are going to do..(the pro's ) open your fone and in the lower section where the mic and the contact point located. they are going to test it if the mike is still ok, if it is ok, they're going to clean it with solutions u'r mic and contact point, and it will going to work out fine, but if not they have to replace u'r mic...

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.php