At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the ecg waveforms are all over the place you are probally recieving electrical interferance. If that happens when nobody is connected try adjusting the filters and see if it makes a diffrence. If it does not make a diffrence it might be the patient cable or leads.
If you have further questions you can contact me at [email protected] or through our website www.overstockme.com
Most likely a bad battery which made the system loose the software. Small chance that the screen is bad. If you connect a pulse ox and you hear the hear rate it is a bad screen. If you don't hear it you will need to get a copy of the software and a new battery. GE does not support these anymore so you should contact a third party if you are not able to do it your self.
If you have further questions you can contact me at [email protected] or through our website www.overstockme.com
After the battery goes dead in these units it earases the internal software. You need to have the software reinstalled with is a rather tricky thing to do.
×