I just don't know what program and format to use so I can listen on my AVH-P4900

Here is a link to the owner's manual for the unit:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130AVHP490.PDF

error-02 is a dirty disc.
Clean disc or replace scratched disc.

Thats it

Just means dirty disc, clean or replace.

All in car dvd players run off of analog tuner,,,, I don't remember the exact date, but keep in mind , usa is going all digital so it will become useless...

Here is the link to the manual, hope this helps. http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/429450968AVHP4900DVDOperationManual0328.pdf

If so please rate my solution accordingly. Thanks, David

hold the 3rd button down on the screen, it would be the biggest round one their. a screen will pop up and ajust away

Hi,
i,d say that if your DVD player Supports MP3 playback. that it would. however Putting a few MP3s On A Dvd is like Throwing a bucket of water into the sea, And expecting it to make A difference. reference Only.
Try putting the MP£s onto A CD-R.
Also if your putting MP3s onto A Dvd, make sure you Have lots of them, for the Machine to recognise.
Or put several Folders Onto the DVD, Another alternative. is to shove A Dummy-File on There about 500mb Plus.
Finally make sure That your player Supports The -R format, And that your Writing Software, is fully completing it,s Task/Finalising by writing The T-O-C ( table of Contents )

Mike @ Compurepair.

Posted @ 22.44 PM. ( G.M.T )

You are using the wrong cable. you need the CD-IB100II. is a control box with cable

fgwarsterfdt

is there an override code I could put in instead of the toggle switch?