Wi-Fi Connectivity I have wi-fi enabled laptop, kjam and wi-fi router thru which i get inet connection. i can successfully use my internet on kjam, laptop and desktop but i can't make it networked or say connected thru either wi-fi or bluetooth for file sharing and other sharing work, even desktop and laptop is not getting connected for file sharing. my ADSL line, thru D502T is connected to DI-524 Wi-Fi router and thru that DI-524 router, thru cable my desktop is connected. All machine and my kjam can share internet and working fine. but it is not allowing me to share my kjam's GSM network which is packet enabled data service from my service provider. My phone works with that fine but my laptop (vista home basic) is not getting connected with bluetooth or wi-fi to either desktop or laptop. how to connect my phone to laptop ? even windows mobile device center on vista tells me that not connected but in device manager, it is stating connected. Any solution ?

Hi Shiela

Try the following as sometimes it's a simple setting missed..

Solution-1
On your phone under Settings>> WiFi >> Hold the Name of Your Network >> Now Click on Forgot Network.
Now reboot the phone & modem/router and try to connect the Wi-Fi again.

Solution-2
Pull out the phone battery while it is working & re-install after 30 second. Phone will reboot again now try to connect to network and check internet connectivity.
Solution-3

You can browse to Settings>> WiFi >> then press left menu key & Click on Advanced. Now check that Wi-Fi timer is not off. If Wi-Fi Timer is on then turn it off.
Now disable Wi-Fi & again enable it. Now check the connectivity on Android.
Solution -4 (Important)
Update your phone, Modem& Wi-Fi Router time and date to match the internet provider time and date. This is very important because 2 out of 10 cases are because of this issue.
Solution-5
Check the Internet connectivity after disabling the antivirus & mobile data.

ou can try these options. Please follow step by step instructions on your phone.
A. Reset Wi-Fi:

1. Delete all the configured wireless connections.Settings-> Connectivity -> Wi-Fi -> Select Network
2. Click on Forget
3. Do this for all your connections
4. Now Enable Wi-Fi again. And connect to router.

B. Using Static IP Address:

1. Settings-> Connectivity -> Wi-Fi -> Select Network
2. Make sure to disconnect the network if connected.
3. Now open the network,
4. Select Static IP
5. Now you can assign IP Address
6. Here are default ips (It may vary according to your router)
   IP : 192.168.0.2 or 192.168.1.2
   Subnet Mask : 255.255.255.0
   Default Gateway : 192.168.0.1 or 192.168.1.1
   DNS: any two of these =>
   • 4.2.2.5
   • 4.2.2.1
   • 208.67.222.222
   • 208.67.220.220
   • 8.8.8.8
   • 8.8.4.4

For screenshots visit http://www.samsungbadaapps.com/tips/dns-failed-error-on-wi-fi

Sir/Madam

iOS: Troubleshooting Wi-Fi networks and connections Symptoms This Issue is Related To Your apple Mobile And Make Sure You Already Install HP Printer Software In Your Desktop or Laptop. If yes I suggest you perform below Solution for Your Apple 5s and HP Priter Connectivity Issue:

Learn how to troubleshoot WiFi.Issues you may encounter while using your iPhone, iPad, or iPod touch.

Resolution Occasionally while using your iOS device, you may notice unexpected Wi-Fi behavior: Difficulty locating or connecting to a network
Unexpected Wi-Fi signal strength or disconnects
Inability to access the Internet
Not automatically connecting to WiFi when expected
Follow these steps to troubleshoot the above issues:
1.Be sure you're in range of your Wi-Fi router (access point).
2.TapSettings WiFiand turn WiFi off and on. If your Wi-Fi setting is dimmed,follow these steps.
1.Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
2.Restart your iOS device.
3.Tap Settings WiFi and locate the WiFi network to which you're connected.
4.Tap and Forget this Network.
5.Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
6.Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
7.Update your deviceto the latest version of software.
8.Update your Wi-Fi router to the latest firmware. For AirPort Base Stations,install updates using the AirPort Utility.

If the issue is still unresolved Follow the steps below for the issue you're experiencing.
Collapse All'Expand All

Unable to locate a Wi-Fi network

Unable to connect to a Wi-Fi network

WiFi disconnects or signal strength is less than expected

Unable to access the Internet while connected to Wi-Fi

Unable to automatically connect to Wi-Fi

Additional Information Find information onconnecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings forconfiguring your Wi-Fi router for use with iOS devices.

Notes
1.iOS devices sold in China may use the term Wireless LAN (WLAN) instead of Wi-Fi. Not all China iPhone models supportWLAN.
2.If needed, please consult with your network administrator (which may be your Internet Service Provider) for assistance with this step.
3.iPhone 5, iPad devices, and iPod touch (5th generation) are the only iOS devices that can connect to 5 GHz networks.

If You Still Haveing Problem then Visit official Below Apple Website URL Link:
http://support.apple.com/kb/ts1398

Or

In case you still having HP Printer Issue Then Follow Us On:


HP Printer Support

things needed internet connection wi-fi router. wi-fi enabled laptop.
steps switch on router enable wi fi on your laptop check for availbale networks connect to the network. if asks key contact service provider

1. Dear! Check your notebook wireless settings and correct it if it is necessory.

2. Chekc your wireless router settings may it need to update for your notebook.

Good Luck

Connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1 or
http://1921.168.0.1

type user name as "admin" and password as "admin" or blank or "password"

Then configure your router as WEP.
Then go to wireless and check that wi fi is enabled.

Then go to wi fi security and add WEP key it is your password to connect your wi fi.
Also enable dhcp if you want get ip auto to computers.
configure your wan settings as your internet service provider like dns ip addrses.
Then save settings and restart the router.

Now go on your laptop first turn the wi fi switch on your laptop .
Then check that your wi fi network adapter driver is proeprly installed.Also check in my network places that your wi fi is enabled.
Then double click on wi fi icon and click on "View wi fi networks."
then connect then enter password which you set in router wep key.

Let me know if you need more assistanse.
Thanks.

Connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1 or
http://1921.168.0.1

type user name as "admin" and password as "admin" or blank or "password"

Then configure your router as WEP.
Then go to wireless and check that wi fi is enabled.

Then go to wi fi security and add WEP key it is your password to connect your wi fi.
Also enable dhcp if you want get ip auto to computers.
configure your wan settings as your internet service provider like dns ip addrses.
Then save settings and restart the router.

Now go on your laptop first turn the wi fi switch on your laptop .
Then check that your wi fi network adapter driver is proeprly installed.Also check in my network places that your wi fi is enabled.
Then double click on wi fi icon and click on "View wi fi networks."
then connect then enter password which you set in router wep key.

Let me know if you need more assistanse.
Thanks.

You're creating a conflict. If you're using wi-fi, don't plug it in. If you're using hard wire, don't use wi-fi.

Youe broadband router is working ok with the broadband cable.So it is configured with the broadband cable.Now,to work with the wireless internet,you have to configured the wi-fi router to work internet.You can see the wi-fi connection but unless & untill you will configure wi-fi router it must not work or if before it was working with the wi-fi then you can check the wi-fi router setting because it might change by mistake.Surely it will work after configurating wi-fi router.