Svd48600w f5 error code - Whirlpool GBS307PR Electric Single Oven

Question edited for typos. However "turn back"??
Frigidaire Error Codes

Error Code: F0, F1, F5, F6

• Code Description: Electronic oven control failure
• Solution: These codes indicate a malfunction in the electronic oven control. The electronic oven control (EOC) may also be referred to as circuit board, control board, mother board, ERC, or clock. Unplug the appliance for about 10 minutes to see if the error code will reset itself. When you reconnect the power, if the error code is still displayed, you can test the temperature sensor with an Ohm meter to determine if it has the proper level of resistance. If the oven control is failing or defective, replace it.

Also says Relay Board fault

https://www.google.com/search?q=Frigidaire+oven+error+of+F5

..

F5 error code relates to a outdoor fan speed malfunctioning. This can be caused by a faulty outdoor mother board or a defective outdoor fan motor

F5 = EOC electronic control failure replace electronic control is stated in the service manual. If you have any further questions message me them back. Thank you
Rick

Hello Donald,

The F5 error code means that the control board has detecteda error within it self and theirfore the control(also called clock or EOC) needs to be replaced. The F5 error code can be cleared by pushing the cancel/off button and if it returns a short time later their is defiently a malfunction inside of the clock and it would need to be replaced.


GENE

Hi, this is just a sample of some error codes, you do need the brand and model number for you to get a good idea on what the failure code is for your oven. link to follow: http://www.managemylife.com/mmh/questions/110137-does-f1-f2-f5-error-codes-indicate-oven

F3
or
F4 Open or shorted oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. F5 Loss of relay drive circuit If this fault code cannot be cancelled, replace the oven control (also called clock or ERC).

Hello there:
Here is the code for these 2 codes hope they are very helpful for you
F3
Open or shorted oven temperature sensor Replace oven temperature sensor F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC)

f-5 is a defective door latch code.

F5-E0 Door Error Check Door
F5-E1 Door Latch Check Latch
F5-E2 Door Switch Check Switch

It may just be a door switch

I unplugged the oven and it cleared the code and was able to self clean the oven.