Linksys e1200 router no internet connection, locked up

Check your poxy settings. Almost sounds as if there is a proxy server blocking access. Also check DNS settings. If you need to hard code DNS settings into the network connection. I use googles DNS free servers at 8.8.8.8 or 8.8.4.4 these are a global DNS server.

Refer to the User Manual here: http://support.linksys.com/en-us/support/accesspoints/WAP610N/download

Reset and reconfigure.

Check you DSL or cable modem to make sure it is connected tot he internet. If it is then you need to point your Linksys router to the DSL/Cable modem's IP address as the defualt gateway.

I need more details about your problem. What have you installed?

check if the router indicator is blinking the cable connected to the router port is fitted in well.

This sounds like a route problem. This can happen if the settings to the WAN are correct. If you are using a dialup DSL router check to make sure that it is connecting to your ISP. Same for a cable modem. Once you have verified that it is connected properly then set your WLAN gateway to point to the WAN IP number. if you are using DHCP for IP addressing for your wireless devices make sure that the gateway address is set correct also. Check DNS settings sometimes the ISP's DNS servers are not setup correctly or are not stable try using googles free DNS numbers of 8.8.8.8 or 8.8.4.4

What is the exact problem with the wireless connection ?
How many wired and wireless computers do you have?
Do you get any error message while connecting to the wireless network?

See Linksys E1200 wireless router setup

For that connect your router to computer with ethernet lan cable then you can access it with below ip address in internet browser.http://192.168.1.1 or http://192.168.2.1 Type as user as "admin" and password as "admin" or blank or "password" or "1234" then you can see configuration page of router.Click on wireless settings enable it if you want to set password security then enable WEP and enter password then you can connect it.Enable DHCP and Set WAN settings and internet service provider then save settings and restart router .Let me know if you need further assistance.Thanks for using FixYa.

connect the Ethernet cable from the the DSL port from back of the modem and the other end to the INTERNET port at the back of the router.