SD card not registering

Throw it away and stop driving yourself crazy about it. They are cheap.

What model Kodak EasyShare camera? Some of them only work with SD cards, not with SDHC cards. The same applies to kiosks. Make sure the slot is marked "SDHC' and not simply "SD".

The Digimax A7 may not be compatible with "High Capacity" SD Cards (SDHC). If this is the case you will need to locate an SD card that is 2GB or less in size as anything larger than this is a high capacity card.

SD card wikipedia page

Your reader has to be made for the ultra SDHC card.

No, it's a hardware issue. Your 8GB card is an SDHC card (the HC stands for High Capacity), but the card reader in your machine is clearly only compatible with the older type SD cards. SDHC devices will accept SD cards, but devices designed solely for SD cards cannot read or format SDHC cards.

There is no firmware update for this, your only fix is to buy an external reader compatible with SDHC cards for connection via a USB socket. Most new readers are fully SDHC compliant, but check the specs for shelling out your hard-earned...

Remove the SD card from the camera. Slide the tiny switch on the side of the card to its other "unlocked" position. Reinsert the card in the camera. But if you've already tried this, see this link for additional things that you can try.

Hi,
I'm sorry to tell that PowerShot SD 630 does not support SDHC cards over 2 gig.
If you want the camera to take a card over 2 gig then you are stuck standard SD cards.
The other camera does support the card because it's a higher model.


Regards.

Based on your camrea's manual (I read it on Kodak's site), your camera will take an SD card so you will most likely be fine as long as you do not use the SDHD type (high density) . The SDHD's store more data and it seems to be newer cameras support this type, not the older. The Ultra II is simply a faster memory than the standard and I believe there is an Extreme type that's even faster. The speed is best when getting images off of the memory card. In camera buffers help get the data to the card. After you aquire one, format it in your camera.

It will not work with any "sdhc"

Previous solution is the FAIL. Original poster says it works fine in _camera_, but not in _printer_. _Printer_ is the compatibility issue, not camera.