Will a Uniden TRU 9496 handset work with a TRU 9466 base
SOURCE: Dead Uniden DCT5280 Handset
if battery just replace battery but the head sets are compatible with other handsets of same ghz say 2.4 you just gotta set in base and let base recognize new hand set these phones are practically built the same way but only with new technology
SOURCE: Tru 9496
SOLUTION:
1. First, remove the battery cover on your unregistered TCX905 and look
under the battery to confirm that you indeed purchased a TCX905 because
some Uniden handsets were packaged as 905's but were not.
2. Take the fully charged unregistered 905 to the base unit TRU9496.
3. On the TRU 9496 base unit press "Menu" then select "Registration" and press OK
4. You should get the message "press the # key on the remote handset".
5. Depress the "#" key on the unregistered 905 and it should register.
SOURCE: Uniden handset doesn't work
If you replaced it with a working new battery pack. You can test it in another phone. The Battery pins on the phone board could have a poor connection which requires soldering.
SOURCE: Uniden cordless phone model TRU 9466 3.5mm to 2.5mm adapter
Hi Ted,
I'm looking for a solution to a similar problem. I found this adapter that might help you: <http://www.theheadsetbuddy.com/pc-computer-headset-to-uniden-phone-adapter/>I can't vouch for it first-hand since I haven't used it but am about to purchase it. It looks like you should be able to use a headset or separate headphones and microphone with it.
--Tom
84 views
Usually answered in minutes!
×