My Bosch 52dBa dishwasher used to complete auto wash in about 100 mins. But suddenly jumped to 138. Normal wash (which I never much used before) is still timed at 99 minutes. Found and cleaned filter and removeable grille on floor of machine, changed back to gel detergent. Water is nice and hot, dishes coming clean. Why such a suddenly long cycle time? Machine is two years old, replacing six year old Kenmore that CAUGHT FIRE on Christmas Eve. That machine was an orphan stuck in the midst of a long list of machines recalled for potentially catching fire. No joy from Sears, no joy from Whirlpool. Shame, shame, shame... But back to my Bosch. Any ideas?

SOURCE: Bosch Exxcel Auto Option/Detergent tablet does not dissolve?

It seem that your DW drain it's water by syphon action. Check if the drain hose is properly installed as a U shape; otherwise the DW can drain itself at any time, leaving the soap undissolved .

SOURCE: Dishes are not coming out fully clean

the is a new product out called the dishwasher filtration system. it actually filters the water going into your dishwasher and leaves your dishes spot free. after the first load i was amazed that the white film was gone and my dishes were sparkling. you can get it at www.dishwasherfilter.com.

SOURCE: DIshwasher Cycle TIme INcreases by 20 minutes over two years

Try cutting the breaker off for 5 min, This will reset the control. The issue is in order for a dishwasher to clean the dishes properly the water in the dishwasher needs to be at least 120 deg f. If its not the dishwasher keeps adding more time with the heater on to try to achieve this temp. The dishwasher only uses about 1 gallon of water per fill so if the water heater is a ways away or the temp is not hot enough, the water temp in the dishwasher will not reach 120.

SOURCE: My dishes comes out still dirty

I put a bottle of CLR in the dishwasher and I did a wash without any dishes. Repeat if needed.

SOURCE: I have a GE Triton XL dishwasher that all of the

Hi

If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next thing to check for is the water pressure and fill valve. Check if the water is filling in and the spray arms are throwing the water with enough pressure. Try and listen to the sound if you hear a proper spraying action sound.

If it seems as a low water pressure then check the fill valve. Now, check if dishwasher is draining the water or not. While the dishwasher is working check whether the dishwasher is draining and there is not much left out water after the cycle is complete. Try cleaning the spray arm with a soft brush. The water temperature plays a major role in cleaning of dishes. The temp should be between 125 and 150 F for dishwasher to clean the dishes. Hope this helps... Please post back if you need more information.

Daniel