Only the top half of the text is displaying. - Olympia InfoGlobe Caller ID

Try replacing your video cable, if that doesn't work, try using a different input on the T.V. If that doesn't fix it, you may be out of luck with out an extended warranty.

Hello,

Have you tried unplugging it and plugging it in again?

not sure what half screen you are referring to

click start control panel display desktop you can select a different desktop from the drop down list
or a browse button where you can select different pictures this may vary depending on your operating system

also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settings
always click APPLY after making any changes

on the top of the internet page you should see some tabs file edit view favourites tools and help click on the view tab on the drop down list you should see a zoom size %

click a different percentage also a text size you might try a different text size although this will not increase the size of the page only the text fonts inside it

if you do not see these tabs in the top toolbar

right click in the top toolbar you will see a number of toolbars and options select the menu tab this will add at it to the toolbar

or if its actually half of the screen

you will need to connect to another monitor or your television to your computer with the vga lead monitor connection

click start control panel display change display settings adjust resolution this may vary depending on your operating system

you should see a no 1 and a no 2 with detect and identify keep an eye on the screen when you select the number tabs this may vary depending on your operating system

when you select the no 2 tab this should be the extended desktop always click apply after making any changes

or click start control panel administration tools computer management device manager scroll to monitors right click select scan for hardware changes

if you can get an extended desktop your monitor is faulty

if you cant get an exended desktop

hope it helps

You have either the circuit board that drives that half of the screen(one for top and another for the bottom) or you have a bad display panel.

Go into menu and under CLOSED CAPTIONS look to see if TEXT is engaged---if it is set to text 1 turn it off or to text 2,3,4, etc

Text was a feature never really used but it is there, some cable boxes also have this setting/feature.

Let me know if you have questions.

There could be a problem with the LCD display or the PCB of the control. If it doesn't bother you, I wouldn't have it fixed, but if it does I would. Generally the text/numbers displays the time and the room and set temperatures. It also shows messages about the heater. i.e. "Pre heating heater furnace - Please wait!" This display is not really important.
Mat

The Blue CRT is bad.

Did you try Control Panel and Display, Setting tab and adjusting the resolution by moving the slider? That should take care of it.

sounds like the lcd screen has come unglued from the tilt window.