BUNN MY CAFE BAD TAST WITH COFFE OR HOT COCO

A common place for a leak under the machine is the barista seal that goes in the bottom of the boiler around that eject rod. Barista seal part number is MS5002202, Seals on the tamping piston are MS5002040 (there can be 1 or 2 of these piston seals) If fixing the leaks does not fix error 6 then I expect it will end up being the distributor. Part number MS2A01500

Sounds like your machine is congested. Consider cleaning out the nozzle or the filter.

not brew if no water coming in to filll the tank

Add about a half cup of white vinegar to the water an run it through
the maker about three times.After that use fresh water about three times. should be cleaned out .

Hi,
mix half white vinegar and water together...then pour this solution in just as you would if you were making coffe....minus the coffe grounds of course... then run it through a cycle and then run clear water through again... and you will be good to go...do this once a month or so to keep it working great...

heatman101

If you will call Customer Service at 800-352-2866 with the model and date code we can further assist you.

How old and have your ran vinegar water mixture to clean teh coffee maker? I woould run 1 part vinegar to one part water to clean coffee makers 2 -3 times a year. Here's a vinegar cleaning link.

http://ezinearticles.com/?How-To-Clean-A-Coffee-Maker&id=57769

Most likely this is your heating element, but it could also be your main thermostat

If you just bought this brewer, ask your retailer if they will replace it. if not, you can get ahold of the bunn warranty department in your country. they will give you instructions on getting a replacement. This brewer has a dead short in it.

there is an overfill tube in the rear that may be leaking.