Question about Frigidaire AEQ7000ES Dryer

Open Question

Drying, cool down & wrinkle release lights blinking

Dryer stops

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: Clothes Dryer Break Down

Check your dryer vent and lint collection area for clogs, make sure there is no kinks in the dryer hose and the one way vent outside your house is not blocked. Your dryer is overheating and shutting down due to a thermal fuse that is on a timer and takes while to reset.

Posted on Mar 12, 2009

Ad
heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: no heat, but dryer runs

Hi,
If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...


http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Posted on Apr 28, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: My dryer will run, but won't heat. After

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dryer does not blow hot and will not shut off and no digital reading will display.


Hello Bryan;

My name is Peter. I am a retired field service appliance technician.

So, here are the probable causes:

1.) The blower wheel draws air through the dryer and pushes the air out the vent. If the dryer won't stop, the blower wheel may be plugged up or not be spinning properly, which reduces the air flow. Check to see if the blower wheel is securely fastened to the drive motor shaft. Check the blower hot air discharge manifold for blockage.

2a.) If the dryer won't stop, the gas valve solenoid coils might be defective. Over time these coils will fail, causing the burner to run intermittently. If the dryer is not heating properly it may not stop. Replace the coils as a set.

2.b) The heating element warms the air before the air enters the dryer drum. If the dryer won't stop, it may be because the heating element isn't working - which greatly increases the drying time. Check the heating element for continuity.

3.) Dryer sheets and fabric softener can leave a residue on the lint filter, reducing the air flow. If the dryer won't stop, check to be sure air can flow freely, clean the filter as needed.

4.) Although not as common, if the dryer won't stop it may be because the moisture sensor is either defective or shorted

5.) If the dryer won't stop, check the high limit thermostat. If defective, the high limit thermostat can turn off the heat prematurely, lengthening the time it takes to dry a full load. This is not common.

6.) The cycling thermostat regulates the temperature of the air in the dryer. If the dryer won't stop, it may be caused by a defective cycling thermostat turning off the heat too early. This is not common.

7.) The thermistor senses the temperature of the air in the dryer and cycles the heat on and off. If the dryer won't stop, the thermistor may be defective. This is not common.

Nov 16, 2014 | Dryers

2 Answers

GE dryer starts but..... stops


What you describe is either a failed evenheat board or a failed motor relay.
Please post the complete model number from the machine and I can help you narrow it down. There should be a wiring diagram inside the console with voltage checks also.
Thanks/Mike

Nov 25, 2007 | Kenmore 63932 Electric Dryer

1 Answer

Leq2152ee1 dryer does dry but keeps stopping if put on any setting over 15 min. Dryer stops single beep and top four lights blink.


MAY BE BAD MOTOR WITH BAD WINDINGS USUALLY STOPS AFTER 20 MINUTES OF USE? OR HEATING ELEMENT IS OVERHEATING? DUE TO BAD VENTING? THERMAL CUT OFF KEEPS SHUTTING IT DOWN?

May 08, 2014 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Dryer is occasionally leaving rusty looking smudge marks on clothing.


don't open door (stop dryer) until cool-down and dryer stops. many times the heating element is still hot and when you stop the dryer in the middle of the cycle, the rear of the dryer where the heating element is, will scorch your clothes.

Nov 29, 2009 | Frigidaire FGQ332ES Gas Dryer

1 Answer

Dryer stops in the middle of cycle


The door latch has failed, that's why your dryer stops. When the door opens it stops the drum and turns off. Fix the latch.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Jul 01, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

Dryer does not heat


Q - My electric dryer runs but will not heat, what could stop my dryer from heating?
A - Things that could stop a electric dryer from heating:
- house fuse or breaker ( needs two of them ), heating element, burnt wire, thermostat(s), thermal fuse ( not all models ), motor heat switch, timer, selector switch, burnt power cord/plug.
A ohm meter test for these parts is here.
Q - My gas dryer will not heat, what could stop my dryer from heating?
A - Things that could stop a gas dryer from heating:
- glow bar igniter, thermal fuse ( not all models ), coils on the gas valve, gas valve, thermostats,motor heat switch, timer, selector switch, sensor.
A page for checking gas dryers is here.

Mar 07, 2009 | Kenmore Dryers

1 Answer

Dryer stopped working


The dryers drive belt most likely broke. it must be replaced with a new one.

Dec 20, 2008 | Kenmore 88752 Top Load Stacked Washer /...

1 Answer

Kenmore 80 series dryer stoping after running for 10 to 15 minute


Start any cycle. Dryer runs for 10 to 15 minutes, then stops before cycle is complete. Start again, stops again in 10 to 15 minutes.

Nov 11, 2008 | Kenmore 63942 Dryer

1 Answer

Whirlpool dryer


If your dryer stops during its cycle, wait ten minutes and start dryer again. If dryer starts, then the motor was overheating.

Solution, Check for lint blockage around the motor and for possible overloading. If dryer repeatedly stops during its cycle, especially during consecutive loads, replace motor.

Good luck

Aug 10, 2008 | Whirlpool LER5636P Electric Dryer

1 Answer

Dryer makes a loud noise then stops


If it stops running when hot it may be the motor. The belt or drum rollers would not stop it from running.

Dec 23, 2007 | Maytag LSE7806A Top Load Stacked...

Not finding what you are looking for?
Dryers Logo

Related Topics:

858 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...