Dish 6.3 remote code for Samsung HT-X70 DVD/receiver

You might be able to find the code on here: http://dogbytecomputer.com/universal-remote-control-code-list.html

Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

trifonas_ger

If you are trying to use your Samsung TV remote, it will not work with our DISH receiver. Some universal remotes can be programmed to the receiver but you may not get full functionality with the universal remote. Our remotes are designed to allow for functionality for the TV if programmed to the DISH remote (volume, on/off). I hope this helps.

Ray Calo
DISH Network

DISH Changed there policies.

rpallot,

I have provided a link on how to program the DISH Network remote to the Samsung TV. The link is:

http://www.dishnetwork.com/SupportSection/remote-setup

A link for the remote codes is also included.

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

I hope this helps. If you have any other questions, please respond to this link.

Ray Calo
DISH Network

I AM HAVING SAME PROBLEM WITH MY HT-X70 I HAD FOR ABOUT 3 YEARS NOW. I OPENED IT UP AND DUSTED THE LASER OFF BUT STILL NO LUCK. ONLY THIN I CAN THINK OF IS LASER IS BURNT OUT AND NEEDS TO BE REPLACED

Remote manufactures and service providers continuously add support for new TV products. If you have the following Satellite or Cable Systems, try these remote codes for Olevia HDTVs.

Also available is the Olevia Universal Learning Remote RC-LRN that offers component programming of most video hardware including your Cable or Satellite Receivers, VCR's, TiVo’s, DVD, Blu-Ray or even HD- DVD players. The learning remote is available at 866-965-3842
Dish Network Remote Codes 506 or 127

could try Dish Network..Remote Codes 506 or 127
Satellite TV Systems Dish Network Remote Codes 506 or 127
Dish Network Remote Codes 506 or 127

It's kind of silly but I just pushed the VCR mode button, pressed the power on and off mode button & pressed the up button until the remote found the code. Took awhile but it finally worked.

DO you have manuals for all the units listed?
If not , try the Samsung consumer site.
It would take me quite a while to figure out your situation even with manuals and I have a business to run besides.

Also, ask some questions of Tech Support at Samsung..Let them KNOW how much you spent on their stuff.

God bless,

SF

dish network remotes are universal, you can program your receiver, vcr/dvd, telivision and stereo to most remotes. if you need info on this just post again, otherwise i would list your issue under the remote brand