Remote is set on spanish I need English

Try going to your menu button or setup button on the remote. Look for the word "Idioma". That is spanish for language. Once you select ENGLISH to change, make sure you follow the exit instructions so it will be memorized

Did you try the "Reset to Factory Settings"? It worked for me once.

You need to use the remote to go to the setup menu and set the language to English, or if you are in the USA set it to US English, which is different from English.

unplug the tv for an hour or more and it should reset to factory settings and revert to the original set up menu

You may be able if can enter the menu to change from Spanish back to English--(very old set) by using vol or channel buttons to navigate--this is not certain but possible--idioma is word to look for--language.

Press and hold the STOP/SET button for two seconds, then release to access the set-up menu.

The answering machine announces, For English, press NEXT, press SET to continue (in English). Para espanol, oprima PREVIO, oprima PROGRAMAR para continuar (in Spanish).

Press NEXT, answerer enters English voice menu mode. If PREVIOUS is pressed, answerer enters Spanish voice menu mode. If SET is pressed, answerer remains in the current language mode. In any case, the answerer enters to the TIME/DAY menu.



If you need a manual, you may download one here.

The problem is not the disc itself but your DVD player. If other discs still play in English, and it is just this one disc that plays in Spanish, then your player is using some sort of stored setting to recognize your preference for spanish on that particular disc.
Forgive me if you've already done this, but try turning unplugging the DVD player for a period of ten seconds or so, and then plug it back in. If there is a reset button, press it. See if the disc still plays in Spanish after that.
If so, you may need to navigate the DVD menu of the offending CD to turn off the language setting your daughter selected. If you don't speak Spanish, try navigating to the language settings on one of the other discs with the English menus. Memorize how you got there, and take the same path through the Spanish language menu. Return the language setting to English, and exit.
Hope this helps.

Display Language
You can select either “English” or “Spanish” as the display language. The factory
preset is “English”.
• If you select a language you cannot read, change the display language again

1 Press [MENU].
2 Scroll to “Initial setting” by pressing [up]
or [down], then press Select.
3 Scroll to “Change language” by pressing [up]
or [down], then press Select.
4 To change from English to Spanish, press
Español.
To change from Spanish to English, press
English.
• The display changes to the selected language.
• You can also select a language by pressing [up] or
[down].
5 When Spanish is selected, press Salvar, then press [OFF].
When English is selected, press Save, then press [OFF].

You will have to fly blind a bit, but remember that the Spanish word for language is "idioma" and the Spanish word for English is "Ingles" - Here is a link to the user manual that will help you - Sansa does have a Spanish version of the manual if you want to compare. Eventually, you want to find this menu/setting:
Reset All
This will reset the player to its original factory settings.
1. Press Menu to return to the Main Menu.
2. Move to Reset All and select it.
3. Select Save to reset to factory settings or Cancel to stop.

www.sandisk.com/assets/File/Downloads/user-guides/clip-usermanual.pdf

-Tha Mp3 Doctor