Office Equipment & Supplies Logo

Related Topics:

A
Anonymous Posted on Nov 17, 2013

How to disassmble Brother DCP-J925Dw

How to disassemble

1 Related Answer

General Systems Consulting

  • 5051 Answers
  • Posted on May 27, 2012

SOURCE: Disassmbly guide

Look inside the battery case, hard drive case, memory caseand dvd drive slot for screw. Some screws on the bottom case in inside ofsome of the device cases might have the icon of a keyboard next to it. Those screws hold the keyboard in place.

Turn the laptop over, remove the strip that is just above the keyboard but becareful because a cable might be attached to it. Then remove the screwsthat hold the keyboard in place that are under where the strip was and gentlylift the keyboard out because there is definitely a cable under it.

Next you can remove the screws from the lcd hinges at the corners and lift thelcd screen off, also note that you will have to pull the antennas cable and thelcd cable when you remove the lcd.

Next start removing any screws that hold the palmrest in place. Take note ofany cables that are attached to the palmrest and remove them then lift thepalmrest off.

Next start removing any screws you see that hold the motherboard to the bottomcase, then lift the motherboard out an start replacing the fan.

A digital camera to take pictures will be most helpful to refresh you memory ofwhere things were.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Brother mfcj825dw. How can I replace paper feed roller?

You can find all the procedures required to change the paper rollers, with detailed images for each step in the service manual for this equipment.

https://www.anyservicemanuals.com/downloads/brother-dcp-j525w-dcp-j725dw-dcp-j925dw-mfc-j280w-mfc-j425w-mfc-j430w-mfc-j435w-mfc-j625dw-mfc-j825dw-mfc-j835dw-service-manual-and-parts-list-manual/
0helpful
1answer

Erreur 49 dcp 195c

Either print head or print head PCB is faulty. If you ever disassembly the print head, please reconnect the harness again.
0helpful
1answer

Cc4 205 00000012

Sir/Madam

To solve this issue, please install the latest scanner driver. If you use MFL-Pro Suite Software,
  1. Click Start => Control Panel => Programs => Programs and Features.
  2. Select Brother MFL-Pro Suite from the list, click Uninstall and follow the on screen instructions.
  3. Once the uninstallation is completed, disconnect the interface cable and restart the PC.
If you do not use MFL-Pro Suite Software,
Make a temporary folder on your HDD to save the downloaded self-extracting file, e.g. C:\bront

Please click here to download the uninstall tool to remove the drivers.
Once downloading is completed, double click the downloaded file to extract it.

"ZIP Self Decompression" appears. Click DECOMPRESS.

"The decompression process was successful." will appear. Click OK.

A folder will be created in the temporary folder created in Step 1.

Open the folder and double click DelInf32.exe. "Brother MFC Uninstaller" dialog box will appear.

Select your model and click OK.
"Complete" will appear. Click OK.

Once the uninstallation is completed, disconnect the interface cable and restart the PC.

Click here to download the latest "WHQL certified Printer Driver and Scanner Driver", and install it following the Install Instructions.

Or

Still Having Problem Then Go To Brother Printer Official Website :


When trying to scan using the Brother ControlCenter3 on Wind Brother


Or

Stll Having Brother Printer Problem Then follow Us For On:
Brother Printer Support
0helpful
1answer

BROTHER PRINTER DCP-195C I INCOUNTER PROBLEM WE REGARDS IN PRINTING MESSAGE PAPER JAM BUT I ALREADY GET THE PAPER INSIDE THE PRINTER BUT STILL PAPER JAM SHOWN ,WHAT SHOULD I DO?PLEASE .....

kindly check your encoder strip if their any dirt just clean it.... you need to disassembly your machine 1st... and after that if the problem still exist you need to clean the sensor or your printer head....
0helpful
1answer

What model toner for the DCP 8040

Hello
The Brother DR-510 Compatible Printer Drum ( Brother DR510 ) is used for the Brother DCP 8040 Laser Toner Printer.
For more information visit http://www.priceless-inkjet.com/cartridges.BrotherDCP8040.html or
http://www.inkcarts.com/brother-dcp-8040.html
Hope this helps, if so do rate the solution
63helpful
3answers

DCP-165C Compact Colour Inkjet Multifunction Printer: in brother dcp 165 printer the error message clean...

brother dcp-165c printer unable to clean , see troubleshooting and routine maintenance chapter in User's guide
4helpful
1answer

How to fix error 32 and error 50 for brother dcp-165d

This is errors in purge station on your printer.If you are a professional disassembly the printer and look purge unit.There is a gear which broke or the purge station just stuck.Clean the encoder strip and encoder gear.
If you not, better don't touch anything and look for service in your area.
Not finding what you are looking for?

110 views

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...