Question about Ryobi Multi-Volt Battery Charger
Hi, I'm trying to determine if the batteries or the charger is dead. Neither battery will hold a charge, and when I put them in the charger I get both the Charge Plus(Yellow) and the Fully Charged(Green) indicator lights. There is voltage (24.2 vdc) and current present on the charger. The batteries are #1314702, 14.4v Any advice would be appreciated! Thanks, Dave
I had the same problem. No need to repeat it here, but I found this solution worked for me. In case I didn't embed / post it right, copy / paste this into your browser: http://youtu.be/GhRQZEeQzP0 Hope that helps
Posted on Sep 25, 2012
Same thing was happening with my Ryobi 18V Nicad Charge + batteries. I boujght a 18V Chicago Electic quick charger from Harbor Freight tools, and just jumped the wires to the battery while monitoring the voltage with my meter. It started around 9v, and while the Ryobi Charger did nothing, the Chicago electric charger cycles on/off repeatedly till the voltage goes up to around 20 volts or so. At that time, I simply put the battery in the Ryobi Charger and it instantly went to the red "fast charging" mode. Seems it needs some decent battery in the battery before it will actually charge it. FYI. the charger from Harbor Freight #43933 cost me $4.95 !
Posted on Mar 06, 2010
I've open the charger and found that Q4 is open. But they have removed the part number from the component so you can't get a replacement.
Posted on Nov 02, 2007
Same problem here...Where in the hell are the serial #'s located anyway? I don't have any info on my batts listed on them except P-100 and "G0444" and a rep told me via email that neither one of these are the #'s they need to release warranty info to me....
Whatever....S'why I just bought a Dewalt 5 pack...Bulletproof.....
Posted on Sep 16, 2008
I had the same problem, but when I saw hotrod182s post that raised a flag in my mind so I connected a battery eliminator to the battery for a couple of minutes and put it back in the charger and now its working.
Posted on Nov 11, 2011
Anyone figure this problem out yet?
Posted on Apr 13, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 02, 2017 | Drills
Apr 22, 2012 | Tools & Hardware - Others
Dec 23, 2010 | Ryobi Multi-Volt Battery Charger
Nov 08, 2010 | Ryobi Multi-Volt Battery Charger
May 31, 2009 | Ryobi 15" Electric Factory Reconditioned...
May 17, 2009 | Ryobi 3-piece 18V Drill / Circular Saw /...
Mar 29, 2009 | Ryobi 15" Electric Factory Reconditioned...
Mar 11, 2009 | Schumacher & Fast Charge Starter Charger
Jan 24, 2009 | Ryobi Multi-Volt Battery Charger
3,123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: