How do u connect to the WiFi on LG boost mobile phone.. on suddenlink
Hi dasianelle- My name is Connie and I am with Suddenlink. I would be happy to assist you with setting up your Wi-Fi. My direct email is connie-AT-suddenlink-DOT-com. Thank you, Connie
On the phone you would need to gointo settings > wireless and enable your wireless radio. You should then get a notification that wireless networks are available. Select your's or a public wireless network if you're at a coffee shop, ect. Enter any applicable passwords. For this to work you need to verify your phone has wireless capabilities and that the phone and router support the same 802.11 standard. Current Standards are a,b,g,n and ac
SOURCE: belkin router wifi with i phone and g1 will not connect the lap
this is because of the security type WPA enabled in the router...youo can login to router setup page by typing 192.168.2.1 in the internet explorer...click on security (found in the left side, if it asks for password leave it blank and click submit) and change the security type to wep64bit and type any 10digit number as your password in key1...dont type anything other than that in any other boxes....click on apply changes...
now scan and connect your network from iphone and enter security key and login....
also delete the preferred networks from your laptop and scan and connect again....
rate me if it is useful....
SOURCE: I'm using ENHWI-G3 in my desktop and also in
We had the same model number and the same problem. My laptop can connect to the network fine but my i-touch and wireless phone can connect but unable to browse the internet. It's so frustrating. But I was able to find a firmware, i'll upgrade it when i get home. I'll give you a feedback.
SOURCE: no wifi and lan light
Sometimes, you may just need to update the drivers for your adapter, suggests PC Mech. If you cannot connect to a home network, move your wireless usb wifi adapter closer to the router. Other radio frequencies, such as cellphones and microwaves, can interfere with wireless signals.
SOURCE: connect Nokia C3 to Netgear router
Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configure the wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
189 views
Usually answered in minutes!
×