Driver software I've a Advanced port replicator model PR1006R which didnot come with a CD I'm not able to activate the driver's of Base system device & ethernet adapter so as I've formatted my laptop compaq nc4010 table notebook so gve me the solution.

A base system device is any hardware device pre-installed on your laptop, such as a CD-rom drive, a USB port, an Ethernet port, video card, etc. These devices all require pre-installed drivers that were supplied by Dell with the factory setup. The most common problem is to have one of these driver files corrupted or deleted by accident. To solve a base system device driver problem, you have to go into Windows Device Manager (Look in Control Panel), and look for devices listed with yellow question marks or other indications that they have a missing driver. You either then go to the Dell support site for your laptop model, or the driver disk you may have gotten with your laptop, and reinstall the needed driver.

You can download the device drivers from the Compaq/HP WEBsupport/download page. Make sure you select your model laptop and the Windowsdrivers you require and install them. Click on this link to download thedrivers: -
http://welcome.hp.com/country/au/en/cs/support.html

i can install all drivers through internet if you need contact me

Reinstall you Operating System with the Latest Version,and install the Driver from CD driver you've got when you Buying IBM ThinkPad.

If your Laptop has a "Latitude C/Port Advanced Port Replicator" Then this Port Replicator connects Dell Latitude notebooks to peripheral devices such as a monitor, printer, keyboard and mouse. To accomplish this, connect your peripheral devices to the Dell port replicator itself, and leave them connected to it. Then connect your notebook to the port replicator to access the devices without having to attach them individually each time you want to use them. You can also set up speakers on the Dell Latitude C/Port port replicator to provide improved quality audio.

Follow following steps:
1) Place your Dell Latitude notebook in your C/Port Advanced Port Replicator and turn on the notebook using the power button.

2) Place the speakers you want to connect to the port replicator on either side of the port replicator according to the Left and Right (L and R) labels on the speakers.

3) Plug the audio line connector from the speakers into the audio line out plug on the port replicator. The audio line out plus is on the right-hand side of the port replicator base next to the infrared port, directly opposite the notebook ejection lever.

4) Plug the power cable from the speakers into a power outlet if needed. Battery-powered speakers will not require this. Turn on the speakers following the manufacturer's instructions.

5) Open your preferred music or audio software (such as Windows Media Player or iTunes) on your Dell Latitude notebook and play an audio file to hear the newly-attached speakers.

hi, to install the your camera..just connect the usb to the usb port then insert the cd to your cd/dvd drive then start install the software the just click next until it will finish...

regards

Descargar has the drivers on they site. Here is the link.
http://descargardrivers.es/cms-v11-driver/download-2404.htm
Hope that Helped x404x

here you will get all the drivers hope fully at this link

http://driverscollection.com/?H=Compaq%20nc4010&By=HP

i downloaded the software that was on this site..........www.driverguide.com

Check your usb driver in your system. it's installed than you try to check other usb device, otherwise you have to change your system's usb port. Have a good day.