Luminox 8800 Crown will not screw down

take it to a watch maker for a quote and to see if the parts are available

Did you try to change the battery? That should solve the problem.

The model 3001 does not have a screw down crown, but is just as water resistant as a screw down style

If it's like my Luminox 1828, the crown has to be unscrewed before it can be pulled out and worked like a regular crown. Just don't forget to screw it back down afterwards.

it has a screw-down crown, you have to turn it counterclockwise until it pops looses slightly, then you can pull the crown and set time...dont forget to push and rescrew it down to case to keep it water tight :)

Well I'm, not an expert of fake Luminox, only the real ones, but I will tell you that a 'real' Luminox will be heavy to the touch, good quality steel...another thing that is a must if it is real is the glass tubes on the hands and on the dial at the hour markers...they are very small glass tubes that are not 'charged' by putting in light, they stay lit regardless of any surrounding factors...most fake watches will have 'painted' on glow onto the dial and especially the hands...this model also has a screw-down crown and sapphire crystal...hope this has helped...good luck :)

this model has a screw down crown...turn counterclockwise until crown pops up then pull out 2 clicks...make sure to rescrew it down when finished

try parsecent.com...they would have the parts to fix

No real way to clean it yourself, you need to take it to a professional who can diassemble it, clean it then reseal...unfortunately that takes tools and the knowledge...dont try at home, if its gotten wet, it WILL need to be taken apart and worked on.

This model is like any other analog watch, only difference is the screw-down crown...turn counter-clockwise until crown pops up...pull out 2 clicks and set time...push in 1 click to set the date, then into case completely...remember to screw down watch back into case...good luck :)