Question about Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

How to change the channel my Sony Trinitron TV turns on to?

Hi, previously I could turn the TV on by first turning the power on the digital box (using one remote controller)...then I pressed '2' on my Sony RM-836 remote control, and the TV screen would show a symbol of a small rectangular box with curved corners with an arrow going into the rectangle on the left of it. This symbol was to the left of the number 2 on the TV screen. Then a minute or so later, the picture would show on the screen, and the symbol & number 2 would disappear. There's a similar rectangular shape with a left arrow symbol on the remote control underneath the power button...I think my housemate must have pressed it somehow...because now, when you turn on the TV, it shows the symbol next to '1' instead of '2'. You can only hear sound now, no picture. Please does anyone know how I can change it back so it comes onto the symbol with the '2' again as before? I think that will make the picture come back again, as it will be coming on on a different channel than present. thanks :)

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Hit menu button on your remote, navigate to channel setup menu. on the sub-menu, set channel fix to your channel that you require. now when your tv powers up this will be the default channel. if this doesn't fix your issue then try cycling through video inputs tv/video button on your remote.

Posted on Nov 10, 2013

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
BMW Rider

Larry Eastman

  • 232 Answers

SOURCE: Sony Trinitron - Picture Disappears

Hi, IK circuit is engaging which basically means the picture tube is getting tired, the only "fix" is temporary (may get another year out of it). You have to increase the "screen control clockwise".
Remove back of set, follow large black or red wire attatched to picture tube down to the flyback transformer, mounted on flyback are two black controls, one is focus (leave it alone) the other is "screen", adjust it clockwise approx. 1/4 inch, remember that this is a high voltage circuit so use one hand in the set the other hand out of the set at all times,any questions ? e-mail me back, good luck, BMW Rider

Posted on Feb 27, 2008

Anonymous

  • 1 Answer

SOURCE: My Sony Trinitron TV does not respond to remote control commands

the tv wont come on the standy timer light is on

Posted on Jan 02, 2009

Anonymous

  • 1 Answer

SOURCE: TV won't "talk" with satellite cable

Try to see if you have 5volts for your EEPROM. If the voltage is normal try to replace your EEPROM or try to reprogram it. Your EEPROM is corrupted so that's why it will not store data.

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No BBC channels available after retuning Sony Trinitron TV


When TV channels are moved from one frequency to another frequency that was previously used by a different channel (sorry, but there's no simple way of saying that !) as has happened recently in th UK, some digital TVs and digiboxes struggle to sort the channel list out properly and channels can go missing as you describe.

If your equipment has the option to delete all currently stored channels (normally in the tuning menu options) then do so and then do a full re-tune.
Sometimes, this solves the problem as the equipment is no longer aware of any previous use of a frequency and just loads every channel it finds.

If this doesnt work, or your equipment doesnt have the option, then there is normally the option soemwhere in the menus to retore the item to "factory defaults/configuration". This will clear all previously stored channels and after a full re-tune your missing chanels should be there. However, any other configuration changes you previously made, e.g picture size, output type (RGB/NSCT/etc), etc will be lost and you'll need to set these again.

NB. some regions of the country have lost some channels temporarily now until after the switch over programme completes at the end of 2012. If you visit the Freeview website, this will tell you if your area is affected.

Nov 07, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Blackout area on screen


Make sure the TEXT and CAPTION options are turned off.

I am not sure about the Sonny's, but on my Toshiba a black box appears when I inadvertently leave one of the close captioning (CC) on for text or captions on (such as CC1, CC2, etc.).

Feb 15, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

No colour when digital set top box attached


Ensure the set top box is set to the correct video out. Probably RGB if scart lead or CVBS if coax lead.

Jun 10, 2017 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony FD Trinitron WEGA TV Model Number KD27FS170 volume problem


my sony trinitron is blinking six blinks and I cannot turn it on, please help

Nov 22, 2008 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

My Sony Trinitron won't turn on...has 4 blinks in Standby.


Hello,
There are 3 reasons for 4 blinls
1.unit went to stand by mode because of h-pulse
2.Vertical defflection pulse stopped
3. power line is shhorted or power supply is stoped.

Solution:
1. check 13vdc on A board of powersupply stage
2. Check IC561 on A-board.

Good Luck
Dals123

Sep 08, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Cannot see TV through digital box on my sony trinitron


If there is no audio as well then this suggest that the digital box is at fault. The fact that you can watch DVD's proves this fact. Unplug the digital box for 2 minutes and then re-try. Good luck.

Jan 07, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Sony Trinitron Model KV 20M20


You may have a bad H board which is the board that has the voulme/channel buttons on it. You may want to have a Sony asc give you an estimate to repair. Good Luck

Dec 04, 2007 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Black box in bottom of picture


Check your cc mode setting and turn it off(after noting the setting,)if this cures the problem dont use the setting noted above

Nov 11, 2007 | Sony FD Trinitron WEGA KV-32XBR400 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-24FS120 24" TV Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...