HELP> When I turn the receiver on it turns on for 2-3 seconds and then shuts off. The power button also blinks red for several seconds. Please help....verrrrry frustrated! Thanks
Remove all speaker wires, than start adding one speaker ata time. after every speaker you attach, turn the reciever on, (meaning you attach first speaker than turn it on, if OK turn it off than attach second speaker than turn on).
One of your speaker is cross-over and when you reach this particular speaker, the reciever will turn off with a loud thump. you have to change the pos and neg wires of that speaker.
Good luck
Read the manual. You've either got crossed speaker wires, it's overheating, or it's a more serious problem. The same just started happening to mine, so I'm taking it in.
791 views
Usually answered in minutes!
Here is a Denon AVR-886 7.1 Channels Receiver, there is no remote and there is a problem with this unit. It powers on and scans the channels, after about 3 seconds it shuts off
The same problem happened to me yesterday. the system volume went up the changed setting from tv to receiver, popped now the system only powers up for 4-7 seconds as it scan the channels and goes back off. nothing changed from the night prior, no one touched it and now i have this problem. i have checked all the speaker connections to no avail.
i have the same problem even when nothing is hooked up to it,just pluged in
shuts off even when the only thing hooked up is the plug
I had the same problem unit turned on then off with in 2 to 3 seconds even if not other item was connected
took it to a shop in Pickering, Ontario, Canada they fixed it for me
the place is called
Vistec Electronic Services Inc. 905-509-7399
This is for an SR5097 Marantz receiver
The machine auto shuts down after several seconds when turned on and then blinks red on power button.
Any help is much appreciated in helping me solve this.
Thx,
Josh
×