KENMORE ELITE REFRIGERATOR MODEL #795.77719700 LITES STAY ON WHEN DOORS ARE CLOSED,WHAT IS MY PROBLEM

There are many Kenmore Elite models with numerical identifiers. You may be able to replace the rinse aid door, or you may have to replace the whole door, if parts are available.

Google

kenmore elite (model) parts

..

This site, https://www.americanfreight.com/br/pdp/kenmore-elite-72053-31-0-cu-ft-french-door-bottom-freezer-refrigerator-stainless-steel/80788 , has the dimensions of the Kenmore Elite 795.72053* bottom freezer french door refrigerator.

I hope this helps.

Cindy Wells

https://www.repairclinic.com/Shop-For-Parts/a4b6d703464/Model-79578546800-Kenmore-Refrigerator-Parts

Refrig of the year: Kenmore Elite 74033 Refrigerator
Consumer Reports Rated: Excellent

Hello Charles,

Just when I'm thinking Sears SERVICE is NOT some sort
of sad/bad joke... you put in a Kenmore Elite Model number...

continued search found your Owners Manual... Pages 10 & 16 are what you want

The front should be slightly higher than the rear to aid in door closing... (page 10)

Your refrigerator has two front leveling legs-one on the right and one on the left. Adjust the legs to alter the tilt from front-to-back or side-to-side. If your refrigerator seems unsteady, or you want the doors to close more easily, adjust the refrigerator's tilt using the instructions below: NOTE: Tools Required: 11/16" wrench or flat blade screwdriver.
1. Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator.
NOTE: Having someone push backward against the top of the refrigerator takes some weight off of the leveling legs. This makes it easier to adjust the legs.
2. Open both doors again and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and you should turn both leveling legs the same amount... (page 16)

`` After that...

All you have to do to maximize that efficiency is keep the closure area free of pizza boxes, ice cubes or errant frozen food bags.

Hope this was helpful...

Kenmore Elite 74033 Refrigerator Review Kenmore com

check to be sure you have the correct length filter in place, you may have one to long for the unit.

I just did a google search. It seems that it is a communications error between the computer in the back of the refrigerator and the front panel display,. Some people have replaced the computer only to find that the problem stays. At least two have found that wires have broken in the front door.
The wires get flexed when the door is opened and closed.
Use your model number at the sears parts direct to see user manuals diagrams and parts lists. Link below.
http://www.searspartsdirect.com/

The switch at the bottom of the door is bad, not turning the light off when the door is closed

We have a kenmore elite refrigerator modle number- 795 7756,7757 and it has been making a humming noise very constant now after two weeks, what could it be?

you have to send model number,on some bottom mounts there is a metal striker on the door that hits the switches,sometime that gets bent back,all you have to do is readjust the striker by bending it if screws aren't loose but i don't know what kind of bottom mount you have

replace your door switch it is stuck on the open part