I just got the chain back on but my
Hi,
Some of your comments look like they're missing but from what I can see you had to put chain back on and now the door doesn't close all the way.take the cover off and look at the limit switch,this the travel adjustment. The switch for the close side is making contact too soon so it shuts off early.You need to adjust contacts so its further away. Depending on where the trolley was when you reattached the chain, you might not be able to adjust it back enough.But try it first. If you still come up short you will have to take the chain back off and move the trolley back to where the door would be closed and reattach chain. now open position will probably need adjustment leave door unhooked and just let trolley move in case it over shoots the mark either way.
Loosen the chain enough
so that you can remove it from the sprocket above the motor unit.
With the door closed run the motor until the sprocket turns clockwise
and stops. With everything attached replace and tighten the chain.
Some adjusting of the up and down limits will probably be required.
1,117 views
Usually answered in minutes!
×