My churches slow closing toiler has stopped closing slow

to much water pressure on the water line. or the valve is very sensitive. either way no danger just annoying, you can adjust the float this can sometimes stop the pipes banging.

Check for obstructions.

The obstruction detection system mounted on each side of the garage door is an infra red transmitter and detector. This is meant to ensure safety and prevents closure of the door if there is an obstruction like car or person blocking the doorway.
In your case the sunlight might be hitting the detector and not allowing the infra red signals to reach it. Many people provide some cone like an empty toiler roll around it to prevent sunlight hitting it.

Give it a try. You could also buy proper shades for the device from the supplier of the garage door.

Sounds like it has an oil leaks. It has slowed and won't go over a very slow speed? is that what you mean?, if so, then the computer has placed the vehicle into "Crawl" mode. This is designed to protect the vehicle from further damage to allow it to be taken to a repairer who will fix it. If it has an oil leak I'd suggest getting it towed as any further driving of the vehicle may do a lot more damage ... even in crawl mode.

check for vacuum leaks either the lines or possibly the intake gaskets.

Remove lid, squeeze hinge back into shape and refit, adjusting screws in rear of hinge bracket as you do.

If the seat is a molded wood seat, you can usually get bumpers by contacting Bemis Customer Service, 920-467-4621. The bumpers on plastic seats are not replaceable because they are part of the seat.

Hi,
Look inside of the tank the number will be stampes into the porcelin of the inside of the tank...

heatman101