How to fill front drive transmission with oil

Call dealr

Hello there,

From this page https://www.worldsbestoil.ca/product-cross-reference.php?year=1996&make=TOYOTA&model=TACOMA&engine=2.7L&vin=1



Extract.......

.Engine, 2WD, with filter - 5.4 quarts [1]

Engine, 4WD, with filter - 5.3 quarts [1]

Cooling System, Initial Fill - 9 quarts

AMSOIL Antifreeze and Engine Coolant

Automatic Transmission, A340E Initial Fill - 1.7 quarts

Automatic Transmission, A340F Initial Fill - 2.2 quarts

Automatic Transmission, A43D Initial Fill - 2.6 quarts

Automatic Transmission, Total Fill

4 speed A340F - 10.4 quarts

4 speed A340E - 7.7 quarts

4 speed A43D - 6.9 quarts

Manual Transmission, - 5.3 pints

Differential, With ADRD Front - 2.6 pints

Differential, Without ADRD Front - 2.4 pints

Differential, 2WD Without LSD Rear - 6 pints

Differential, 4WD Extra Long Rear - 4.5 pints

Differential, With LSD Rear - 6.4 pints

Differential, Standard Rear - 6 pints

Transfer Case, - 2.2 pints\'

it fills through the dipstick tube, with engine running,

Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES
Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Unfortunatley, there is no transmission dipstick on the Discovery II's. There is a fill plug underneath on the front of the transmission pan. Pull that and let it come out to a small stream of fluid. Put theplug back in and go drive it. Use a infared laser thermometer to check the transmission pan temperature, needs to be around 190 degrees. Them pull the fill plug back off and top off the fluid level. Hope this helps.

Best of luck

2000 TOYOTA TACOMA 2.7L 4-cyl Engine Code 3RZ-FE

Engine Oil Grade 1......API* All TEMPS......5W-30 Optional ..10W-30
Engine, 2WD, with filter..........5.5 liters
Engine, 4WD, with filter..........5.4 liters

Manual Transmission,......GL-5/ GL-4 All TEMPS......75W-90
Automatic Transmission,A340E......AF3 / A43D......AF3

Differential, Front/ Rear W/ ADRD......GL-5 ALL TEMPS......75W-90
Differential, Front Less ADRD......GL-5 ALL TEMPS......80W-90

Transfer Case,......GL-4/GL-5 ALL TEMPS......75W-90 Gear oil.

Capacity:
Cooling System, Initial Fill..........8.5 liters
Automatic Transmission, A340E Initial Fill..........1.6 liters
Automatic Transmission, A340F Initial Fill..........2 liters
Automatic Transmission, A43D Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A340E..........7.2 liters
4 speed A340F..........10.1 liters
4 speed A43D..........6.5 liters
Manual Transmission, ..........2.5 liters
Differential, With ADRD Front..........1.2 liters
Differential, Without ADRD Front..........1.1 liters
Differential, 2WD V6 Rear..........2.6 liters
Differential, 4WD Extra Long Rear..........2.5 liters
Differential, Short WB With LSD Rear..........2.7 liters
Differential, Short WB Without LS Rear..........2.6 liters
Transfer Case, Electronic..........1.2 liters
Transfer Case, STD..........1 liters

Fluid - A/T: Service and Repair
Transmission Fluid and Oil Filter Changing
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lift Points.
2. Place drain pan under pan
3. Remove oil pan bolts from front and sides only.
4. Loosen the rear oil pan bolts approximately four turns.
5. Lightly tap the oil pan with a rubber mallet or pry to drain the fluid from main case.
6. Remove the oil pan bolts from rear oil pan and gasket.
7. Remove front oil pan bolts leaving one corner bolt in loosely.
8. Lightly tap oil pan with rubber mallet or pry to drain fluid.
9. Remove the following remaining components:
^ The front oil pan bolts
^ The oil pan
^ The gasket
10. Remove the oil filter bolts and filter.
11. Clean the following components:
^ The transmission case
^ The front adapter case
^ The oil pan gasket surfaces with solvent
^ Air dry
^ All traces of gasket material must be removed
INSTALLATION PROCEDURE
1. Install the gasket.
2. Install the oil filter.
3. Install the bolts.
^ Tighten the transmission oil filter bolts to 20 Nm (15 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the front oil pan.
5. Install the front oil pan gasket
6. Install the front oil pan bolts
^ Tighten the front oil pan bolts to 11 Nm (96 inch lbs.).
7. Install the following components:
^ Install the pan
^ Install the gasket
^ Install the bolts
^ Tighten the oil pan bolts to 11 Nm (96 inch lbs.).
8. Refill the transmission with DEXRON III through oil pan fill plug on the side of the (main case) oil pan. Fill the transmission to lower edge of oil
pan fill. Fill plug opening using and oil suction gun.
^ Tighten the oil pan fill plug to 45 Nm (33 ft. lbs.).
9. Lower the vehicle.
10. Check the transmission fluid level. Refer to Transmission Fluid Checking Procedure.

5.7 liter V8 Engine code 2: Fluid capasity: Engine oil with filter 6.6 liter 5W-20,  Cooling system: Total fill 13.7 liter Automatic transmission total fill 13.3 liter Front differential 1.7 liter Rear differential 2.23 liter Transfercase 1.8 liter
4.7 liter Engine code N Fluid capasity: Engine oil with filter 5.7 liter 5W-30 Cooling system: Total fill 13.7 liter Automatic transmission total fill 13.3 liter Front differential 1.7 liter Rear differential 2.2 liter Transfer case 1.7 liter
3.7 liter Engine code K Fluid Capasity: Engine oil with filter 4.7 liter 5W-30 Cooling system: Total fill 10.0 liter Automatic transmission total fill 13.3 liter (W5A580 7.7 liter) Front differential 1.7 liter Rear differential 2.2 liter Transfer case 1.7 liter.
Hope this helps, and good luck. 

I suppose you mean that there is oil on the floor where it is parked. It's the same as a Ford Taurus, and I suppose you have a 3.3 engine. Lack of oil in the transmission means that it won't go anywhere. If you fill the transmission with fluid, it will leak out again, but you might be able to drive the car - hopefully to transmission shop to fix it. If the car will not drive with fluid added, then it will have to be taken for repairs. What I do when I have a car that won't drive (and has driven to where it's parked) is to add 2 quarts of transmission fluid and then see if it will move. Normally this works & I can move it into my garage for work. Sometimes it takes 3 or so, but thats usually for full size or pickup transmissions. Rick

If it is an automatic, which I assume it is since you're looking for a dipstick, it needs a special fixture to add fluid(Dealer or foreign auto mechanic) or check level. If it's a manual trans, there is a check/fill plug on the end of the transmission behind the driver's side front tire, probably takes a 17mm internal hex head socket. Use 75W/90 gear oil, filling the trans until oil just starts to overflow through the hole.