Impressa Z7 won't start up led panel din no messages then turns off not in a cold room please help need coffee

Do you mean the Jura Impressa C65? If you are prompted to clean the machine, first touch and hold the Maintenance button for ~2 seconds. You will be prompted to empty the tray. Empty both the drip tray and the grounds container. Replace these. Press Rinse and place a container under the spout. Touch the Maintenance button again. Wait while the water flows into the container. When the water stops flowing, the LCD screen will change from "Cleaning" to "Add tablet". Open the cover of the filler funnel for coffee grounds and place the Jura cleaning tablet in the filler funnel. Close the cover. Touch the Maintenance button again. Wait for the Cleaning cycle message to be replaced by the "Empty Tray" message. Empty the drip tray and coffee ground container again and replace them. The coffee maker will be ready to use when you see Espresso Heating. The procedure for descaling is in the manual.

The instructions are available on the product site, https://www.shopjura.com/impressa-c65.html , under the Manuals tab. The current link is https://us.jura.com/-/media/global/pdf/manuals-global/home/IMPRESSA-C60-C65/download_manual_jura_C60-C65_ul.pdf?la=en&hash=A918AF729D1132A17AF6A80C45F95D8CCC692ACE&em_force=true . The section on cleaning the super automatic coffee maker are in chapter 5, which starts on page 30. The section on Cleaning starts on page 37. The section on Descaling starts on page 39.

I hope this helps.

Cindy Wells

Search Results

How to Fix Jura Z5, Z6 and Z7 - YouTube

? 16:03
https://www.youtube.com/watch?v=HlCu5m9isT4
Aug 18, 2013 - Uploaded by Parts Guru
I changed the filter, pressing button for System Fill, get message System is filling. .... My Jura Capresso Z5's milk frother doesn'twork. When I ...

Jura Capresso Z5 Impressa - No milk frothing - YouTube

? 1:05
https://www.youtube.com/watch?v=_jF_8rNUn4A
Oct 25, 2013 - Uploaded by Frederic Valiquette
Hi all, My Jura Capresso Z5 Impressa is acting up. The milk frother doesn't work anymore. When I ...

[PDF]Instructions for Use, Manual JURA IMPRESSA Z5 - Esperanza

https://www.esperanza.ch/.../download_manual_jura_impressa_z5-gen2_...
The IMPRESSA Z5 - Generation II Manual. The 'IMPRESSA .... 5 Preparation at the touch of a button. 40 ..... As coffee and coffee specialities are very important to JURA, we have compiled a ...... It doesn't matter whether whole milk or skim.

My Jura Impressa Xs90 won't switch on and nothing is - Fixya

There are severial videos on uTube that show how to resolve problems. I have included a link that will probably help you.

How to Fix Jura Z5 Z6 and Z7 Jura Z5 Z6 Z7 Disassembly Instructions

Hi, I made a video how to fix your Jura step by step, good luck,!
http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Hi, I made a video how to fix your Jura step by step, good luck,,
http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Yo James,

I know nothing of your unit, but I've never let that stop me before??.

Sounds like a sensor is stuck in the "tray full" position and popping an error message based upon what "it" is detecting.

OK, how does the unit know from "full tray" (what ever that means). I'm a big believer in problems being created by dirt, crud and in your case, coffee grounds. Unless the sensor (switch?) itself has failed, I'll bet there is debris fouling the system.

Find the "full tray" (what ever that means ??) sensing mechanism and clean/replace it and I'll bet you will solve the problem.

All the best.

Sounds lie the brew unit need to be repaired.

Unfortunately the error message 5 indicates that the thermal block and/or thermal sensor and possibly a control board need to be tested, and likely one or more, possibly all, replaced. My recommendation is to send it to Capresso ask what it will cost first. M

This indicates that either the sensor for the thermoblock is defective or the thermofuse is blown. For this you need to go to your local dealer for service. I also recommend that you measure out the mains.
In worst case the powerprint or the mainboard sends wrong signals to the thermoblock so it`s overheated.

You need to open the grinder, it`s probably packed with old fine powdered coffee that blocks the outlet. Clean this out and try again. Since it works normal when you use pre-ground coffee, there shouldn`t be any problems with any other parts.

Let me know if you want a description for have to open and clean the grinder.

Good luck!