Question about Bosch Nexxt 500 Plus WFMC5301UC
No cold water, machine will not spin out except on Refresh.
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: E02 message
Error relates to water taking to long to get into machine. Check tap is open fully, water pressure is ok, hoses are not kinked. also check the small filters either end of the inlet hoses (inlet valves as well) as quite often they can clog up especialy on a new install. Regards
Posted on Jul 25, 2007
Suggestions: First see that the exit hose behind your machine is inserted at a particular height, ie about 3 feet above ground level, then into the standpipe in your wall. If things dont work plug off the wall, open up behind, you will see a thin pipe coming down from the pressure switch to the drain area. Disconnect this pipe carefully from the top and blow into it, it should be free. If blocked clear, if broken or damaged change. Refit carefully.
Pl rate me helped.......
Posted on Dec 28, 2007
Could be a faulty inlet valve, or not enough pressure to operate valve,
Remove hose onto valve, and check the water is getting to it o/k,turning off the water to the valve before you undo the hose.
Hope this helps.
Posted on Jan 10, 2010
Tips for a great answer:
Dec 10, 2017 | Bosch Washing Machines
Dec 24, 2016 | Whirlpool Washing Machines
Nov 28, 2015 | Kitchen Appliances - Others
Jul 10, 2015 | Maytag MHW6000XW - MaximaTM...
Sep 23, 2014 | Maytag Washing Machines
Dec 20, 2013 | Whirlpool Duet GHW9150P Front Load Washer
Jan 10, 2010 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: