Inconsistent water amount being dispensed

You should call your vendor for service on any commercial brewer. (Especially if it's on loan from them)
*** the following is for information only as all repairs should be performed by a qualified tech.***

The start switch activates the timer (analog or digital) board which turns on the water feed or brew valve depending on the model.

* Check momentary brew switch.
* Check the on/off switch
* Check the timer. Digital timers tend to be sensitive to electrical storms. Analog timers have a dial and are more tolerant of electrical surges.
* Check the water fill solenoid. Should be a definite click when activated. Water filling sound should be very clear.
* No water flow then check the water supply line if it's on.
* Final; call for service to be safe.
Aloha, ukboy57

You have 2 water valves on that coffee maker a water inlet and a dispense valve the warmers are only heat plates the element is inside tank Bunn has a great site for manuals it's a free download

If you need further help, reach me via phone at https://www.6ya.com/expert/michael_f5065d2791067928

drink o matic power cord Questions & Answers - Fixya

www.fixya.com > Forum > Tags

Get free help, tips & support from top experts on drink o matic power cord related issues. ... the drink o matic? the green light wont turn on on the back. the fan wontturn ... stopped working Hi, I have a Smart Planet Drink-O-Matic model # DR3. ... The machine does not cool. ... I have the same machine, my power supply was .

[PDF]UNIT 5 TROUBLESHOOTING - Bunn

www.bunn.com/.../troubleshooting.pdf

Bunn?o?Matic CorporationGiven a realistic scenario when product does not freeze or chill, the learner will be able to ... The learner will be able troubleshoot the torque (ice) system.Missing: sharper ‎image ‎green

[PDF]Operating, Service, CDS-2, CDS-3 Operating ... - Bunn

www.bunn.com/sites/.../27646.0000.pdf

Bunn?o?Matic CorporationTo obtain the Illustrated Parts Catalog, visit the Bunn-O-Matic website, at www.bunn.com. .... In no event shall Bunn be liable for any other damage or loss, including,but not limited ... NOTE - Bunn-O-Matic does not recommend the use of any extension cord .... THREE QUICK FLASHES - Low auger torque is being sensed.Missing: sharper ‎image ‎my

Free Kitchen Appliance User Manuals ' ManualsOnline.com

kitchen.manualsonline.com/

If it is getting HOT and no water dispensing > Make sure water out let spout is CLEAN and clear.

Try brewing a few pots of white vinegar solution, no coffee in the system.

If you will call Customer Service with the model and code date, we will be happy to assist you with this issue.

Sounds like you need a new grommet for the machine.

You may have a thermostat problem.

Contact a Bunn service center and have the unit checked.

The problem is either the liquid control board or there is something blocking the solenoid, or drawing water from the same line pressure. Also check the sprayhead for buildup.

your tank is leaking
Please Follow LINK for parts etc