Screen is locked and can not unlock it on the

Found these two youtube videos; hope helps you


TRIO Stealth G2 with WiFi 10 1 Touchscreen Tablet

TRIO 10 1 g2 Stealth Elite Android Tablet Update 2 Testing Recovery Mode...


You can find more info if you input google search for

Youtube Mach Speed Trio Stealth G2 Tablet

Perhaps the HARD RESET PROCESS can help you, Merrill. I've posted my suggestion as to how it's done HERE. ( http://www.fixya.com/support/t25341481-trio_stealth_new_when_power_goes ) , so you may findt that information useful.
I've had good success with HARD RESETTING when trying to correct errors like forgotten password, or forgotten lock-patterns. However, I've had a Trio Stealth G2 that displayed the SAME problem as yours, Merrill, and it would NOT respond to ANY attempts at resetting. I tried every combination I could : pressing volume down (-) and power; volume UP (+) and power; volume UP & DOWN (+ AND -) and power. It refused to boot. But since the case and the screens were in great shape, I went on Ebay and bought a Trio with a cracked screen, swapped the motherboard from THAT tablet and it worked perfectly.
Final caution, though: ask the Ebay seller to guareantee the physical condition of the ports and other controls on the unit before you buy it. Remember you need a working motherboard.
Best of luck to you, Merrill!

How is it locked? Slide, code?

Hi,
Does the device have a password lock on it.
If it does try removing this first, then attempt a hard reset.
You can access the engineers menu by holding the volume - button and then pressing the power button whilst turning it on.

Other than that the only other option is to reload the ROM with a flash utility.
But this is not for the faint hearted :-)

Have you tried my old trick of pressing the on/off button and at the same time, press the volume+ button. Sounds like you have a screen freeze. hope it helps.
LindaSView

WHAT I NEED TO DO IT WANT DO ANYTHING FROM HERE

all that shows is trio stealth G2 when turned on it freezes I tried the reset button

my table resets up on ever boot , you have to renter all the info every time you boot it up, Trio G2 10in