What does error 2 mean - KitchenAid KCM514 Coffee Maker

Please add make and model of your machine to question, error 2 can mean different things on different machines. Also you can do an online search in Google with your model number followed by error 2 and it might give you an answer. Hope this helps.

*7810*2*E*300050900,M-13,R-10110
what is meaning of this error codes and whats happening for atm machines

ERROR 2 IN MICROLIFE PRESSURE MONITOR MEANS : Unnatural pressure impulses influence the measurement result. Reason: The arm was moved during the measurement (Artefact).

7002 is the error code; 0006904 is the printer page count.

Error means-

Toner motor 2 overcurrent detection error (cyan toner)

• The engine controller PWB (A0004)

detected the overcurrent of toner
motor 2.

Possable causes-
1. Lump of toner inside cyan toner container or defectiveness of toner replenishment drive system.
Replace the cyan toner container.
2. Defective toner motor 2.
Replace the toner motor 2.
3. Defective engine controller PWB (A0004).
Replace the engine controller PWB (A0004).

The printer does not work. I have 2 errors that show up on the printer. they read:TFFS0 ERROR 01TFFS1 ERROR 02what do these errors mean? how can I get rid of them?

EL 2 Error code means an erratic reading coming from the elevation potentiometer. Unfortunately that means a replacement of the motor Star Trac does not sell just that one part. But you maybe able to send the motor to be repair for aabuot 1/2 cost of a new one. Call this # 1800-496-7278 conpany's name is Nation Gym parts they can help you

When you got this error were you running the installation wizard disc for AT&T?
Because as far as my knowledge with AT&T (Bellsouth) this error code comes out when installing the modem using the Installation Wizard CD, this comes out on a version 3 cd. The error code means
"Failed to Upload to ISP" this possibly could mean that you are not connected to the internet.

S01 = Fatal error EX
1) turn off the printer
2) wait a few seconds
3) turn it on again

H63 = DRAM access error
1) turn off the printer
2) wait a few seconds
3) turn it on again

error 2 probably means out of paper - thats what it means for my pixma mp140

yes all 1 800 4my x box ,they call it the rings of death ,they will repair it free of charge and send you a box to ship in in prepaid,just call and tell them the error code,I have 2 xboxxes and beleive it or not this happened 2 both of them and one is the elite,they dont bother fixxing it theyll send you a new one and a 1 month mebership free