Plugged in with power switch on but no power to the unit

If you google for "cd jukebox parts" you can find a list of suppliers of all kinds of jukeboxes. You check with a few that work for Wurlitzer and I think you can find what you need.

CDM12playersandcontrol boards can be mended a www.wurlitzer.co.uk

you need the service manual

The number of Cds in the carousel can be set on the Credit unit to stop it playing fresh air if for example you only have 50 Cds and not a whole 100. Sounds like yours is set to 50 so won't play anything over 50.
I 'think' this is what you do.
On the computer credit unit...
Service Switch ON...Press LT button.
Press 5 on the keyboard once.
Enter 0000
Service Switch off.
Press LT or turn machine off/on.

The iPod should play automatically if plugged into the docking bay. There is a design fault which means the cable on the back of the docking bay gets dragged out if the title rack is dropped down. Check the cables and push them home.

To make the jukebox automatically switch between jukebox CDs and the IPOD source, you'll need the background music adaptor. I have these in stock, but need to know which amplifier is in your machine, as different amplifier types require different BGM units. Please email [email protected]

You don't actually need the whole kit, just the BGM unit. I have these in stock, please email [email protected]

Hi Ken,

I would search on Ebay (do a world wide search)
Here is a seller selling the head only.
Item number 380005560333 (UK seller)
There are a number of sellers world wide including Hong Kong and the USA.

Best of luck.
Regards
Alan Hood
ami-man
UK
Item number: 380005560333 Item location: Kingston, Surrey, United Kingdom
Item number: 380005560333 Item location: Kingston, Surrey, United Kingdom
Item number: 380005560333 Item location: Kingston, Surrey, United Kingdom

Hi,

i have the 1015 OMT Ipod edition. It works just how you say however mine has the BGM module. The ipod is plugged in as back ground music. The BGM module then swithes the input over to cd when someone selects a disk

On the right hand side of the amp you should see a Din socket marked remote volume. If the machines own volume control is also in tact it may be plugged into this socket already. Just swap them over.