The picture is wider then the screen on my rear projection tv

Convergence problem. Replace a fuse by flyback, (small brown/orange one) and resolder flyback.

The picture on my 52 inch RCA Projection television has green, red and blue squiggly lines around the objects on the screen and the picture looks 3-D.

pop the speaker grill off, then take out the 1/4 inch screws and remove the screen, if it's behind the screen, simply brust it away, if it's between the 2 screens, then you must take them apart and remove the body. also while your in there, clean the lenses and mirror with some windex, this will greatly improve your picture.

You have a problem with convergence and all you may need to do is replace a fuse. Look up convergence for your tv model and hopefully you will get an answer as to where the fuse is located and how to replace it. Very common for RCA tv's

There is a service menu that techs can use to adjust vertical and horizontal widths. If it is not an aspect ratio problem then it is likely that it needs to be adjusted.

All I need to know is how to shrink the picture!

converge power supply small pcb about 3 inch by 7 inch with stk-730-xxx chip on it ..replace the chip

tv worked great, turned it off one day and back on the next and the on light would not come on nor would the tv work, rear projection 52 inch rca

Put something else, DVD player, VCR or a second signal, into one of the other inputs on the unit and switch the PIP to watch that input...

try, mcmelectronics, vancebaldwin.com, tritronics