When I plug in my Mits WD-62527 the Green Timer light blinks rapidly for about 1 min. and then blinking light turns off, After the blincking light turns off I then try and turn on the set from both the remote & front panel buttons, but the set does not come on, Green blinking light stays out for about 1 min. and then starts blinking again (repeat process). I've tried the System reset button as the manual specifys and also unplugged the set and left unplugged for 1 hour but still get the same results when I plug back in. This TV has litterally got probably 20 hours use on it.. Any suggestions?
2,663 views
Usually answered in minutes!
same exact problem
i have the same problem as the blinking green light. in trying to correct this problem, i held down the recommended suggestion of holding down the menu button for 10 seconds and then press the power button. the tv was still not coming on showing any picture. please recommend another option.
In the last month i have had the "driver" replaced, the "color engine" replaced (for the 2nd time), and some sort of cable replaced on my WD-62527...all three with separate service visits...and now I have the problem of when I try to turn the tv on there is a clicking (like it is going to power up) then the light turns solid red. After unplugging (or resetting) the tv, the green light blinks for about a minute and then goes dark. The process repeats and repeats until eventually the tv will turn on. I have been told there is a way to get the error codes by pushing two of the buttons...does anyone have a clue what two buttons I should hold down? I have a call into the service guy...I will post how this resolves.
My tv turned off by itself and the green timer lights starts to blink, the blinking goes off after about 45 seconds, when I try to turn the unit on the timer light starts to blink again. I did unplug and push the reset button, I even put the surge protector. The problem is still the same, I cannot turn the tv on.
I need it for manday night football in 2 hrs... please help
roku box light does not stay on I unplug for about 10 min. still does the same thing
I get a steady red light on the bottom left of the tv where it says status. I tried to unplug it and plug it back in. The power light flase blue for about 10 seconds then the red light comes on again.
×