Wind touch ae2020 - MSI Wind Top AE2020-49SUS 20 inch All-in-one Multi-Touch Screen Desktop PC (Black) (AE202049SUSBM4503G32Hewlett Packard)

Assuming your TV is HDMI input only you'll need a converter.

Once you've installed the converter it will be very easy just plug them together set your TV's input to what ever HDMI port you've plugged in. on your PC desktop rightclick go to properties and enable the second display.
http://www.amazon.com/s/?ie=UTF8&keywords=vga+hdmi+converter&tag=mh0b-20&index=aps&hvadid=3482721557&ref=pd_sl_44liqj4bpp_ee

Video card is ok if you can see second monitor, is this a laptop, if it is there is a good chance monitor or what is called inverter is bad...

Have you rebooted the machine? Locate the service in SERVICES (open the Start Menu, All Programs, Administrative Tools, Services) , and restart the processes. You can search MSI support: http://www.msi.com/product/mb/Wind-Top-AE2020.html OR: http://www.msi.com/service/troubleshooting/

Are you able to open unit up? if so, get some canned air and blow heat sink off and try to do so that dust leaves unit and not just moved around

1.Boot your computer in Safe Mode by pressing F8 at startup. Then go to My Computer and right-click on Disk C to select Properties from the dropdown menu. From the Tools tab, perform an error check and disk cleaning.
2You just need to download a software can be used to burn your CD/usb into a bootable one and then boot your computer from it. Run the software to fix the issue after that. There are few free software for you to use, so if you want to take this solution money is indispensable. Windows Boot Genius owns a better cost/performance among such kinds of software I've used. It may be a good choice for you if you have money to pay.

If you go to the Tray Notification Area and right click on the sound icon increase volume, Is it muted? Are the speakers external? Are heaphones plugged in? Are the speakers powered? Plugged in? Is the sound device in service, disabled?

on touch and sew models thread the machine up as normal, select straight stitch, presser foot up, take the thread from the needle and wind it round the presser foot screw a few times, open the slide plate, push the little button over, press gently on the foot control to wind the bobbin, when finished close the slide plate to drop the winder down and pull the threads to the back and start sewing

first of all re install your operating system your operating system is damaged.
if after reinstalling of your operating system the problem is still.
then you have to replace your ram with the new one for that please follow the given steps

first of all open your CPU shutter and on mother board you can see that there is pluged ram in ram bank open the clips and pull out the ram and now place the new ram on that bank.

before replacing the new ram please make sure that your ram is making that problem for that plug out your ram and rubb its golden area with a soft rubber and now plug it on ram bank now start your computer if your problem is solved then ok.

if not so please now replace it with new as i says before. your problem will solve Thanks.

See that the support leg without a wheel points into the wind and see that the air vents on the lid point in the same direction as the wind ie wind down. The bottom air vents to be open.
This works better for me than any other method, however I do agree that one must be patient when cooking anything

My 2004 Lincoln Towncar Signature suddenly developed this habit of setting off the alarm for no reason at all. No wind, no one touching it, etc. How can I bypass this alarm?