I have a 55" Panasonic flat screen that won't turn

SOURCE: MY PANASONIC FLAT SCREEN VOLUME AND TV CONTROL DOES NOT WORK!!

Hello,
Try unplug the power cord while the tv is still on. plug it back after 5 mins. it should work.

SOURCE: Panasonic flat panel just lost power while on,

Me the same some one please help!!

SOURCE: My son dropped my 32'' inch LG lcd tv now it won't

It probably has a cracked circuit board. If you want to repair it on your own open it up and see if you can find where that cracked section is and see if you can resolder it back properly.

francoise cleofas

• 2432 Answers
• Posted on Jun 10, 2011

SOURCE: My son is in Stanley

hi the problem with your tv is with in button key controller board, here are the ways on how are you going to fix the problem.

• open the back cover of your tv with the use of philip screw driver to gain access the button controller.
• remove the connector and then detached the controller board, spray the channel up/down button with a electronic contact cleaner to have good contact.
• if the buttons are worn out you can replace only the buttons just buy at any electronics store, you can also buy or replace the whole button key controller if you want. there are sites in an internet which provide button key controller for tv like for example you can inquire here.
• now after you replace with new button controller reinstall the connector fix it not to loose and then placed the back cover of the tv unit and screw it.
• plug the power cord then turn on the unit. good luck i hope it will help you.

Testimonial: "Thank u so much. If this works it will save us so much money. I'm disabled and live on a very limited income. Thank u. Thank u. Thank u."

Steve Burt

• 245 Answers
• Posted on Jun 24, 2011

SOURCE: tv won't switch to "tv"

Your T.V. is programmed to store the last input you've selected. You have to manually switch it back to your T.V. channel input after each time you switch it to HDMI or any other input even when you turn it off. The "Source" or "Input" button on your original T.V. remote will change this.