I have red bow on top on my skreen and green color is not line up with the rest of the skreen image.
Very easy repair....Just replace the convergence amp board part# BP95-00142E (about $80) It includes both convergence IC's and associated components (Five connectors,one screw,easy access)no soldering...
MY PCN5425R PICTURE ROLLING
Man it seems like the PCN5425R is beating everybody up. Well let me join the group. I had my convergence board replace because I had bow in the picture. And that fix the problem. Then I had the blue color started turning green. Then I had someone to come out to fix it. And he clean the blue lamp out and reseal it. It left a slight blue haze but it not to bad. Now I have diagonal lines in the picture. Even when I change the mode to video to watch DVD it's still there. I had a guy come out to look at it. And he basically told me to get another tv because the part is hard to find. I'm looking for a second opinion. Can this be fix?
Samsung pcn5425r will not power on
I am having similar problems with convergence. When I go into the remote manual convergence mode, the blue is perfect and the red is way off. My question is do I need the whole convergence board or just the STK392-040 semiconductor?
May I please have the PDF of the alignment manual. Â We have replaced the STK semi conductor but the colors are not lining up yet.
[email protected]
×
Can I get a copy of the alignment manual pdf? I'm about to order a new covergance board and would be nice to have in case I need to do alignments as well. Thanks in advance
Replace convergence IC's,then check alignment.
Use OEM quality ==I use Panasonic IC's with no call-backs.
T.
744 views
Usually answered in minutes!
hi guru.I purchase this part#BP95-00142E but my tv still looks the same.please help.thanks
hi.how i can do the alignments?
I purchase the manual alredy and Ido the alignment,but is still the same.before i got red and green only now red,green and blue.I dont now whats happend
tvDummy give me yours email and I send this alignment for you
I HAVE A RED WAVE COLOR GOING THROUGH THE SCREEN
I have the same problem...red bow on top and green distorted througout i tried the convergence setting but it didnt help...
Very easy repair....Just replace the convergence amp board part# BP95-00142E
(about $80) It includes both convergence IC's and associated components (Five connectors,one screw,easy access)no soldering...
Comment by TVtechmaniac, posted on Sep 28, 2007
One of two things:You either never had a convergence problem to begin with or more likely you need to go into the convergence service mode and do the alignments (green can only be adjusted in the service mode)
Comment by TVtechmaniac, posted on Sep 29, 2007
I have the alignment manual on pdf - If you want it let me know
I have just ordered the convergence board, could you please send me the alignment manual so im ready when it arives? Thank you. joediesel
a friend of ours wants to give us this modeal and said :
the green lamp wire became disconnected now the picture does not have green and you cannot adjust green because it is not on the screen, just red and blue, help - also does any one have service manual and alignment ??? It is a samsung pcn5425r
we don't know if we should take it if it is not an easy fix, then what ??? any suggestions ? he said he was watching TV and a green stripe (Like faded) is on the screen ???????
thanks in advance - any suggestions ????
I have a similar problem.  My blue is right on but my red is way off to the right.  I went into the menu mode to try to line up the crosses but it would not move left as needed.  My question is do I need to replace the whole convergence panel or just the STK392-040 piece?
can you please send me a copy of the alignment manual for samsung pcn5425r tv.
thank you.
[email protected]
I have a PCN5425R Could someone send me the alignment manual to me at [email protected] thanks
I also just purchased the convergence board and need the alignment manual. Could someone please email it to me, thanks. [email protected]
My TV looks blurry only on the left side of the screen, and I don't have the original remote to try to fix the convergence... the auto-focus only gets to 5% then quits when I try to realign it... any suggestions? I've had this TV for years and it just got out of focus yesterday...
Thanks in advance!
I have a curved line across the top of the screen and the color making me see double. How do I fix this? Please help. I love this TV and I don't have the money to go out and buy a new one.
Thanks
If anyone has the alignment service mode information can you email it to me at [email protected] pretty please? I got the new board but it's still not lining up correctly between the crosshairs even tho the cross hairs are a close as possible. Thanks for your help.
×