Gt trailz currie scooter needs good battery

Question edited for clarity.
Question moved from Cars and Trucks category.

The batteries, and throttle control could have been tested with multimeter. The motor can be checked with a multimeter and also with a power source (12 volt x 2 in series = 24 volts) or even with the battery pack that is on it. The only part that is difficult to troubleshoot is the Control Box and circuitry, but if the battery is okay for volts, the throttle passes power and the motor runs, it has to be the control box or connection wiring throughout.

https://www.google.com/search?q=EZip+e-900+Electric+Scooter

...

Starting from the battery pack, a wire is loose or disconnected.

Did u ever figure out what the salution was

First make sure the scooter is off.
Unscrew and take off the deck
Unplug and remove the old battery pack
Put the new battery pack in and plug it in, using the same connection as the old batteries pack.
Screw the deck on and your done!
Oh, and make sure you give the battery a good charge(the full charging time). The first charge of a battery is the most important one.

Scooter positive terminal to battery 1 positive. Scooter negative to battery 2 negative. Battery 1 negative to battery 2 positive.

you can have the battery tested for its voltage with an voltage meter and see if it is giving enough output for its purpose, but from the sounds of what you are saying it seems the battery isnt holding enough to power the scooter

Schwinn batteries can be found on amazon, click here and take a look: Amazon com Schwinn S350 Scooter batteries. I hope this was helpful. Cheers

If the battery is old its likely that it needs to be replaced. Also, if batteries sit in the cold in the winter or are exposed to high heat they can be damaged. Try checking out http://www.batteryinternational.com/electric-scooter-batteries.html for a scooter replacement battery.

Try contacting E-zip. <!-- from fixya rte -->

I am having the same problem. By all indications it looks like the motor controller is the problem. Everything else works OK. I am pulling the controller tomorrow and replacing. If that doesn't work I am junking it.