We change the netmask for our net. 255.255.255.0 to 255.255.0.0 No some PC´s can print. How can I change then password o reset it? Thank You
Try this and see if it works for you please email me and let me know first To reset the print server using PS admin follow the steps given below: ----------------------------------------------------------------------------------- Step 1 Open the PS Admin software, select the print server you wish to reset to factory defaults, and then click Factory Reset. Step 2 Click Yes. Step 3 Once the reset procedure has been completed, Click OK. The device is now set to factory default settings. For D-Link's preferred Home Networking application please try http://www.networkmagic.com/nmlp/dlinksupport.php from Pure Networks. It simplifies Microsoft Networking and may allow you to trouble shoot your network on your own. like i sai dtry this and let me know thanks keith
Click start run type cmd press Enter
black screen should open DOS mode
this will vary depending on your operating system
type in net user username
For eg. If you want to change administrator password , type net user Administrator
it will prompt you to enter the new password
enter the new password and the password is changed
hope this helps
1,181 views
Usually answered in minutes!
×