How do i get the printer settings for my printer because i can not find the cd to set up my printer.
If you are doing it as a local printer ( parralel cable or USB it can be done through Start, Settings, Printers and faxes, Add a printer. Network is different. You have to assign or let it get an IP address from the network. You can enter it manually in the printer Hit the left arrow to Network menu hit select Standard net setup hit select Print ( to print out the network settings) scroll to TCP/IP select enter IP manually by scrolling to each number and hitting select
This is actually a Lexmark printer, so what I'm quoting is a Lexmark sol.
turn off machine
hold down returnand go buttons
turn on printer
hold until performing test shows and let go of buttons
it will go to a service mode ( instead of saying ready)
got to printer set up
hit select button
go to engine 1,2 or 3
try each one ( hit select to go into that perticular number)
what you are looking for is a number that has an * next to it. Use the arrow keys to scroll. most likely it changed the setting so go and look for that number w/the * and hit select when you see it.
196 views
Usually answered in minutes!
×