Software installation problems

Skip the installing of any software, unless you like the Canon editing or viewing software, if that is on the cd.
Get a card reader for this machine, and skip any drivers whatsoever.
By using a card reader/writer it is not necessary to get any software or drivers on your machine from Canon. The card reader will read as another drive.

install Blackberry Desktop on your computer and download the latest Blackberry Phone software from your carriers webite and instal it on your computer. Then connect your phone WITHOUT the battery to your PC and Click on App Loader. Follow directions and install the Software. The Installation WILL FAIL THE 1ST TIME. Thats normal. This time connect the phone WITH the battery and try the same thing again and you will have a brand new phone. except your Data.

Go here to try to download the software.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=323&modelid=16347

Good luck and please rate

Which software is this? What is the error? If it is screen resolution, here are the steps:

click start/control panel/display/settings and adjust screen resolution to the high side. Once installed, you may adjust the resolution wherever you prefer.

I am not sure if this is your error, but it is a common problem and a quite easy fix.

Hope this helps!

I had the same issue with my Netbook. In order to get the software onto my netbook I had to use an external monitor. I set up my HD monitor as the main monitor through the graphics driver. I set the main monitor from notebook to monitor. Then I installed the package and set the main screen back to notebook. I can use the EOS Utility which allows my to download my raw images and remotely control my camera, but I cannot run DPP. I hope this is of help

DRIVER

yes

Under your control panel in "Display" go to the settings tab and slide the resolution bar to:

Screen resolution: 1024 x 768 pixels or more,
Color quality: Medium (16 bit) or more

That should do it.

Change your compuetr's display resolution to a better performance. Click with the right mouse button on your computer screen. - The Display properties window will open - Click with the left button on the Setting tab. - Change screen resultion as required - Press "apply" Check whether the new setting solve your problem. Good luck!

Hello, It may be possible that the error msg that you are receiving may be referring to another error. 1st thing I would try is checking the resolution, in some cases if the resolution is too high it may result with numerous issue's if your random access memory (RAM) is not sufficient enough to accommodate the resolution that you attempting to scan with. Try reducing the resolution, also try a different file type, either jpeg or tiff etc..,if all failes check to see if you have the latest driver(s) update for your scanner.