How do I reset my phone system? Nortel Norstar

Before you can do anything you need a M7310. Programming a Nortel voice mail requires M7310. It uses the 3 soft keys under the display to program it. You can get one cheap on EBAY. Next you need to find out what type of Voice Mail System in connected to your Nortel phone system. Below is a link to a Older StarTalk manual. You may have a StarTalk, StarTalk Flash, or a Call Pilot.
http://www.myuserguides.com/Nortel_Norstar_Startalk.pdf#page=15&zoom=auto,-69,407

Below is a link that tells how to reset the System Manager Password.
Reset Admin Password Norstar Meridian and Nortel BCM Help Guides

The default code and password for System Admin is F983 and 1020000 or 1021111. The photo below shows a system admin programming tree. Hope this helps
Charlie

A Nortel Key Service Unit, an ICS (MICS,CICS), BCM (50,100 etc), Norstar (308,616,824), an Avaya IP Office running Nortel cards, or there is another company that makes a Nortel emulation key system but I can't recall what it is right now.

Carl

It depends on which Nortel System your client uses, and which level of software they have in the system. You can try "Feature * * T I M E" (Feature, star, star, 8 4 6 3). If that doesn't work, we'll need more info about the system. Good Luck!

You use the f985 to reset the password. But i cannot publish the password here. It is in your vm manual.

This is simple.
The answer is no.
Each company uses its own voice encoding and technologies...
Nortel will only work on Nortel phone system.

Cheers

Not too sure what type of manual you are looking for, but here is a useful link to have for a Norstar system information.

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

Sorry to tell you but your system is going dead the power supply is going bad . The system needs to be replaced. if you are local in so cal I can install a replacement system for you 626-712-5753 efren

Your system administrator (usually your senior secretary or whoever runs the phone system) needs to reset the password (automatically resets to 0000).

We would like to change the name displays on our phones

ON NORTEL DO A FEATURE 983 PASSWORD IS GOING TO BE 120000 AND THAT WILL PROMPT YOU THRU RESETING THE PASSWORD IF THAT DOES NOT WORK DO A FEATURE 985 PRESS 9THEN TYPE IN (RESET SM ) THEN TYPE IN (PSWD) AND IT WILL GO BACK TO DEFAULT . PS THE SM STANDS FOR SYSTEM MANAGER