At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
BobPress additional functions
press #
press + key until display reads #7 printer
press set
press + key until display reads #4 printer reset
press set
press - key for yes
unplug copier wait a minute and plug it back in
This resets E-000 codes maybe that will help
Good luck
Bob
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi this is not the same sub code but it's a start.
September 27, 2002
Product : imageRUNNER 330 / 400
Title : E805-0002 Error Code
Error : E805 with a 0002 Sub
Code
Workaround : This may be caused by a pinched wire that
goes to connector J108 B-18 on the DC Controller. The wire was pinched to the
frame near the riser to the DADF-A1 exit side hinge. Inspect the harness
indicated by the arrow in the picture.
Canon USA, Inc. Systems & Technical Support Division
Its a fan related error, basicaly you should check all the fans in copier, clean the filters, reconect the connectors, try to find a bad fan,... When you find the bad fan you can also replace it with new matching PC fan
i have ir400 in my machine. first e805 code has been displayed and after that it shows that to load paper. then after e803 code is displayed. please help
Tried that. It didn't resolve.
×