Error code 80 and then 138 quantum edge w/c

There is no Error code 152 listed
https://www.pridemobility.com/pdf/owners_manuals/operation_instructions/fault_list-q-logic-3.pdf

Nothing in the manuals

https://www.quantumrehab.com/pdf/owners-manuals/us_uk_au_q6_edge_3_stretto_om.pdf

https://www.quantumrehab.com/pdf/owners-manuals/us_q6_series_(q6_edge_hd_q6_ultra)_om.pdf

Videos that may help

https://www.google.com/search?q=quantum+q6+edge+3+won%27t+tilt

..

Q-logic_fault_codes.xls (alliedmedical.co.nz)

fault_list-q-logic-3.pdf (pridemobility.com)

Question edited for clarity and spelling typo.

Error: Brake 1 not connected
Brake 1 error detected
1. Turn power off
2. Disengage then re-engage brake lever
3. Inspect motor connections
4. Turn power on

Error: Brake 2 not connected
Brake 2 error detected
1. Turn power off
2. Disengage then re-engage brake lever
3. Inspect motor connections
4. Turn power on

https://www.google.com/search?q=quantum+Q6+2.0+Brake+error+code+1+and+2

..

Question edited to add Maker.
Question moved to model category.

Some help here, but you need a service call

https://www.google.com/search?q=quantum+q6+edge+joystick+error+codes

..

These power chairs normally have some form of error reporting, either numbers, or a flash code on the moving bar. Check your connections to the controller.

https://www.google.com/search?q=Quantum+Q6+Edge+3+errors

..

error code 208. Page 108

http://javafoundry.com/home/Q-Logic_Technical_Manual.pdf

208 Brake 1 Overload: current too high

I can't find anything on 'Supervision Error'.

https://www.google.com/search?q=Quantum+Q6+Edge+3%2C+208+Supervision+Error

you could contact them direct

Pride Mobility Products Corporation 182 Susquehanna Avenue Exeter, PA 18643-2694 USA

Pride Mobility Products Company 380 Vansickle Road Unit 350 St. Catharines, Ontario L2R 6P7

Canada Pride Mobility Products Ltd. 32 Wedgwood Road Bicester, Oxon OX26 4UL UK

Pride Mobility Products Australia Pty. Ltd. 21 Healey Road Dandenong, 3175 Victoria, Australia

Pride Mobility Products Italia S.r.l. Via del Progresso - ang. Via del Lavoro Loc. Prato della Corte 00065-Fiano Romano (RM)

Pride Mobility Products Europe B.V. Castricummer Werf 26 1901 RW Castricum The Netherlands

....

Not entirely sure these are for your model, but they are Q-Logic error codes. You will probably need dealer help.

QLogic 1 and 2 Fault Codes.pdf - Allied Medical

https://www.alliedmedical.co.nz > media > qlogic-...
PDF
FAULT CODE. ERROR. POSSIBLE CAUSE. SUGGESTED REMEDY. 1. SW Fault. Software error. ... 6. SW Fault. Software error. Update software. 7. SW Fault.
6 pages

Fault List Q-Logic 3 - Pride Mobility

https://www.pridemobility.com > owners_manuals
PDF
Jun 29, 2017 - Fault List Q-Logic 3. Number Error Text. Help Text. 1. Warning: Motor 1 not connected. Motor 1 error detected. 1. Turn power off.

..

This appears to be a Mobility Power Chair Base rather than a Cellphone question, so I moved the category.

It looks like you may have a loose connector. The error is a brake related error

Error 208
Brake No. 1. Overload: current too high
Brake wiring shorted, or brake defective.
Check motor brake connector.
Check brake wiring.
Check brake resistance.
Replace brake.

https://www.alliedmedical.co.nz/media/6385/qlogic-1-and-2-fault-codes.pdf

and

https://www.google.com/search?q=quantum+600+edge+3%2C+code+208

..

See page 11 of following manual for help

ne_plus_controller_boi.pdf (quantumrehab.com)

hi, can't find that error code , do you mean 24 ?

What joystick ( controller ) is fitted ?

https://www.quantumrehab.com/quantum-electronics/ne-controller.asp

Regards
Rob