I have kyocera Mita 1635 Copier which is printing Extremely light copies
even after i added new Genuine toner in the machine.
The wire springs holding the transfer roller in place could be missing, check that first.It solved the issue for me
CLEAN THE DRUM UNIT AND CHARGER CHECK THE CONNECTER
How to fix drum kit in keyosera mita 1650
Is one side lighter then the other side of the copy? Meaning uneven copy darkness? If so, I believe the problem is that one or both sides of the drum cartridge and the developer are not connected correctly. The two parts need to be close togather to make a nice dark copy. This model has a very wierd drum unit and has a defect that one or both side of the drum unit locking tabs break and you get very light or blank copies. It's some what coastly to replace the whole unit... That would be a worse case.... If it is just on one side you might be able to push on the cover on the side that is light. If the copies come out better. One side is broken..I would fold up some paper and make a wedge to push the catridges closer. Good Luck
2,688 views
Usually answered in minutes!
Several reasons for Light prints, Please answer a few questions:
Is your copier also used as a printer hooked to a computer?
If yes, are the prints Light?
When if the Last time the PCU (Photo Conductor Unit) was changed? I would Like the Number of copies since the last time it was changed (eg: 30,000 ago, 90,000 ago)
When was the last time the machine was serviced? the number of copies since last service (approx)
REPLACE NEW DRUM WITH TRANSFER CHARGE UNIT
i have kyucera 1128 printer from computer result is normal but photocopier is very light can you help me pls
×