Ir3300 E000261-0000 code solution - Canon imageRUNNER 2200

http://www.copytechnet.com/forums/canon/24451-canon-ir3300-error-e000002-0000-a.html

Thread Canon IR3300 Error E000002 0000

Quoting:

wilson Technician Join Date Feb 2009 Location PASIR MAS , KELANTAN

what you need to do is just resetting your machine.
1. Press * 28 * on your machine in a quick move.
2. Select copier
3. Select Err.
4. Select Clear then press O.K
5. Turn your machine off for 1 minute and turn it on again.

The error code will not be there anatmoreand your machine will be functioning well.

Hi Raj

please follow link it will give you all the error codes and also will tell you what your one is..hope this helps

E014 is strain on the fuser motor. Is the lower roller cleaning roller clean? A build up of waste toner on it and could be sticky/tacky and causing friction. Take it out and clean it or replace it.

Looks like this will require service by a technician.
http://www.printcopy.info/?mod=free&chap=erc&brand=Canon&model=iR3300
E003-0000 The main thermistor reading is lower than 140C when paper is moved

The error code states that the machine doesn't sense the temperature of the fuser getting hotter. Usually this calls for the fixing film unit to be replaced because the thermistor has gone bad.

Hi Abhishek,
Go To Below official Canon Printer Page For Your problem Error Codes Canon iR3300 Still having Problem Then follow Us For Canon Printer Support

Hello, Here is a link to the full list of all the Canon iR3300 error codes with full details.
http://www.printcopy.info/index.php?l=en&mod=free&chap=erc&brand=Canon&model=iR3300

The error code E000000-000 means that you have a problem with the fuser unit. Did you have a power outage recently???? That may have been the cause of the code. Or you may need a new fuser unit... Did you try to rest the error code in service mode?????

ir3300 error code E602-0003

My canon iR3300 is displaying error code E000003-0000. Please help