Need codes lost manual need to reprogram
After some research I have attached a clickable PDF file for you to check out. It is a for a Sanyo Remote Control. Give these codes a try. If it is not for your exact remote control, my best guess is that SANYO remotes all share the same codes. It's worth a try.
Hope this helps!- CBR2009
http://www.remotecodelist.com/remotes/sanyo/sanyo_rmtu100.html
SOURCE: Lost the manual for programing codes
well heres the website for the t.v codes
http://support.rcaaccessories.com/doc/aud1744.xml?docid=810&Referring%20DocID%20List%20Index=4&navtypeid=6&pagetypeid=2&prevPageIndex=4&selectedmodel=RCR311B&selectedFamily=generic
and heres the website for the dvd codes
http://support.rcaaccessories.com/doc/aud1748.xml?docid=834&navtypeid=6&pagetypeid=7&prevPageIndex=18&selectedmodel=RCR311B&selectedFamily=generic&lid=y
SOURCE: steps on how too program tv & vcr
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...
SOURCE: lost program codes
i have citizen tv but my remote wont pick up the numbers is there other number besides the ones that come with the manual ,
please help me im getting tired.
1,488 views
Usually answered in minutes!
×