Print unable 28 - Brother MFC-9840CDW Laser Printer

Could be print head or PCB problem .

no year, stated, ESTEEM ! 1995 to 2002? in USA>? no clue?

it has a fuse. there are 2 fuse boxes, look in both
day one the car came with an operators manual, with fuse pages.
lost that?, sure, (i buy mine day 1 if missing....)

its also covered in the FSM. and at alldata.com
the latter is never lost.. log in, read.
the front box, is near left knee, USA -LHD cars.
wild guess.
1999 USA
fuse 28 , labeled WIP
it shows fuse 28 on right slower side, 3 from bottom.
15amps rated, and color coded same.

Odds are, that the switch on the control panel PCB has a broken connector.... You might be able to resolder the connection. You will have to take the control panel "OFF" to repair it.... It is not easy to get to the PCB ...... Good Luck

Hi there !

I am here to help you to solve your problem.

I believe your print spooler service stop running or your spooler is confused pending some queue at the print spooler service.

To resolve this, follow this procedures.

Go to START MENU
Choose RUN (For Windows XP) or Choose Commamd prompt, right click mouse and run as administrator ( For Window vista and windows 7)
Type the letter "cmd"
Type the word "net stop spooler"
Exit
Go to C: drive
Choose to Windows Folder
Click show content
Choose system32 folder
Choose spool folder
Choose printer
And delete all printing jobs pending
Again go back to CMD window and type the word "net start spooler"
Restart your computer and must also turn off your printer and then switch it on.

It will work fine right now
I hope it helps you

Nov 18, 2009 - Thanks! This solution got the printer working again: Thanks, cene765. Best Solutionposted on Oct 28, 2009 cene765 Rank: Guru Expert Rating: 89%, 343 votes Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this: Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message

try *28* but remember to press 28 a the same time. * is that button next to the screen with little ring(head) and star in it.

Look inside the petrol cap! Otherwise:Audi A3 Recommended Tyre Pressures 1.6 96 - Onwards 28 28 32 40 1.8 96 - Onwards 28 28 32 40 1.8 SE 96 - Onwards 28 28 32 40 1.8 Sport 96 - Onwards 28 28 32 40 1.8 T Sport 96 - Onwards 28 28 32 40 1.8 T Quattro Sport 00 - Onwards 28 28 32 40 S3 99 - Onwards 30 30 36 40 1.9 TDi - 110bhp 96 - Onwards 30 30 36 40 1.9 TDi - 130bhp 01 - Onwards 28 28 32 40

Telephoned Audi Main Dealers around Manchester – Macclesfield very helpful, others either disconnected or not answering. Manual costs £21.85 (inc. VAT) + postage .... Too big to actually download and print, I suspect!

Billy Boy

Your 28-90 AF-D lens can't autofocus with the D40, which requires AF-S lenses with a focus motor in the lens. Sigma lenses with "HSM" (HyperSonic Motor) in the name also have the focus motor.

I'm unable to connect my western digital hard drive to my Windows XP computer via the USB port. When I check the USB 2.0 Controller in the Device Manager, there is a yellow exclamation mark (!) next to it. When I check on the status of the USB 2.0 Controller, the following message appears:

The drivers for this device are not installed (code 28).

What do I do now?