F21 Error code flashing

The Whirlpool washer error code F21 means the washing machine has a "water draining issue", meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.
Nov. 15, 2016

Whirlpool Washer Error Code F21 - DRAINING ERROR - How ...

Videos as well

https://www.google.com/search?q=code+f21+on+a+whirlpool+duet+mean

..

Search Results

whirpool f21 error code - YouTube

? 3:04
https://www.youtube.com/watch?v=b24PVv-ORqg
Jul 1, 2012 - Uploaded by davidmontabon
whirpool f21 error code. ... Maytag , Whirlpool Washer Repair - Drain pump error, no drain - F9E1- MHWE201YW00 - Duration: 4:29.

My maytag 5000 series steam washer stopped and said Sud ...

www.fixya.com/support/t8682656-maytag_5000_series_steam
Mar 17, 2011 - my maytag 5000 series steam washer stopped and said Sud and now says ... Clicking this will make more experts see the question and we will .... I bought aMaytag 3000 seris in 2008 and I am getting these messages: F21 ... Maytag 5000 Series washer F21 error code was flashing and door will not open.

Whirlpool/Kenmore/Maytag & more-F02/F21 & Sd error codes

fixedappliance.blogspot.com/.../whirlpoolkenmoremaytag-more-f02f21-...

Check the drain and pump for any items blocking flow.

Check this video for the how to resolve the F21 error

Hello, Welcome to FixYa.

Based on your post I understand you have a F21 problem with a Whirlpool Duet washer, that indicates the F21 error means an excessive drain time.
As for the door locked issue, it is a by-product of the F21 error. Make sure you get the water out before attempting to open the door manually or it could be messy.

To Manually unlock the door lock system:

1. Unplug the power cord from the outlet.

2. Remove the lower toe panel.

3. Reach up along the inside of the front panel and locate the bottom of the door latch assembly.

4. Located on the bottom of the door latch assembly is a tear-drop shaped tab.

5. Gently pull the tab down about ¼" or until a click is heard.
6. The door may now be opened.

If you follow the link to my solution to this error you should be fixed up in no time.

http://www.fixya.com/support/r9090359-whirlpool_frontload_f2_f21_sd_suds

Thank you for visiting fixya for your washer inquiry. Please take a moment to rate my assistance and leave a brief testimony.

Regards,

Macmarkus :)

First check your washer plug to see if the connections are tightly screwed. Next check your filter if you haven't for long.

Remove the 3 screws at the bottom of the front panel under the washer door. Your filter door will be light brown. If you find a hose there it is to drain out excess water (water that could not be drained by your pump) After you hv drained unscrew the cap and remove all the junk inside. Have a large plastic bag to catch junk and water. Refit carefully after cleaning out. If not solved, something shd be blocking your pump, check this out. Door locked? Press "end of cycle" for 3 seconds, wait for 2 minutes & try the door. F-21 filter blocked.

How abt a nice rating for the free help? Thnks

"F21" is a Long Drain error code. This is an indication that you have an obstruction somewhere in the drainage system. In most cases, this means you probably have a clog in the drain pump. The following link explains:

http://www.fixya.com/support/r1484065-f21_error_code_whirlpool_duet_kenmore

You may have something getting caught in the pump impeller and slowing it down. Included is a follow-on link that explains how to check the drain pump to clean. You may also have to remove the inlet hose that runs from the bottom of the wash tub to the inlet side of the drain pump. Debris can commonly clog in this area as well causing the drain cycle to fail.

NOTE: If these preliminary measures do not correct your problem, you may have to replace the drain pump. It does not take much to damage the pump impeller or motor. Since the error code is generated if the drain cycle exceeds 8 minutes, if the pump is damaged and can't pump at the required volume, the error code will continue to appear until the pump is replaced.

NOTE: The "SUDS" error can commonly occur with the F21 error code as this is can be generated when air is sensed in the drainage system.
If the door won't open it could be jammed due to the program being interrupted.

If you have questions about this repair, or require additional assistance, please let me know. I hope this helps you.

NOTE: If replacing the drain pump is required, the following link explains how:

http://www.fixya.com/support/r401845-replacing_drain_pump_whirlpool_duet

For troubleshooting guidance, the washer comes with a technical data sheet. It should be located behind the lower toe panel directly below the door. If not located behind the panel, it will be affixed to one of the interior cabinet walls. The tech sheet includes diagnostics procedures, troubleshooting tips and the error code list.

"F21" is a Long Drain error. The following link explains how to torubleshoot:

http://www.fixya.com/support/r1484065-f21_error_code_whirlpool_duet_kenmore

What this usually means is that you have something clogged in the drain pump and it needs to be cleaned out. In the majority of the cases, this corrects the problem. However, if you JUST purchased this washer, and it is brand new (not used), I would recommend you use your manufacturer warranty (good for the 1st year in most cases) to avoid the risk of voiding it. The conditions of some warranties, prohibit the consumer from opening the appliance and attempting any repairs. Read the find print just to be sure.

If you have any questions, please let me know. I hope this helps you.

The "SUD" error is in direct relationship the other error code. "F21" is a Long Drain error. The following link explains:

http://www.fixya.com/support/r1484065-f21_error_code_whirlpool_duet_kenmore

If something is preventing water from pumping through the drain pump, you will often get a "SUD" error as air is developed in the pump. Make sure you double check all the drain lines as well.

If you have questions, or require additional assistance, please let me know before you rate the solution. I hope this helps you.

the panel below the door has 3 screws under the bottom lip of the panel. remove the screws to get the panel off youll see the pump right in front of you. you can unscrew the cap on the pump and remove it to clean out the punp. thats where 99% of clogges are on that washer